Ag-ZnO/graphene oxide (AG-ZnO/GO) nanocomposite was synthesized via facile aqueous solution reactions at low temperature in order to improve the photocatalytic activity for cationic dye removal under visible light irradiation. Analytical techniques were carried out in order to determine the abilities including structure, state of elements, morphology, and surface area of synthesized materials. Ag-ZnO/GO nanocomposite presented an extremely high removal rate of methylene blue (MB) not only under UV light (over 99% removal) but also under visible light (85% removal) during the same irradiation time. In this study, initial process parameters of catalyst dosage, MB concentration, and pH of the solution were also examined for MB removal efficiency effects. The proposed mechanisms for the increased removal of MB by Ag-ZnO/GO nanocomposite under visible irradiation include increased photocatalytic degradation, mainly due to increased charge transfer capacity by lowering band gap energy; minimized recombination of the excited electron-hole pairs of ZnO with the addition of Ag into the ZnO crystal lattice; and an increased adsorption capacity with the addition of GO with high surface area and semiconductor function with zero band gap energy.
Desalination by solar steam generation (SSG) system is a green technology to produce pure water, which can address the issue of water scarcity. A novel photothermal material for the SSG system was fabricated by immersing bacterial cellulose (BC) sequentially into tannic acid (TA) and iron(III) (Fe3+) solutions. Surface analysis of the resulting BC–TA–Fe3+ (BTF) material showed that coordination nanocomplexes between Fe3+ and hydroxyl groups of TA were formed on the surface of cellulose nanofibers. BTF material exhibited high sunlight absorption (∼95%), hydrophilic, self-cleaning properties, and excellent structural stability. SSG systems based on BTF had an evaporation efficiency of 91% and an evaporation rate of 1.56 kg m−2 h−1 under 1 sun illumination. Then, an efficient desalination device based on the larger-scale BTF material was fabricated to produce freshwater, the amount of freshwater per day was 5.6 kg m−2 on a sunny day. BTF material, thus, showed great potential in seawater desalination applications along with simple, versatile, scalable, and affordable fabrication methods.
In this work, two copper-based biometamaterials were engineered using leaves of water cabbage (Pistia stratiotes) and purple bauhinia (Phanera purpurea) as templates. The copper sputtering was implemented to produce a thin copper film on the surface of leaves. The scanning electron microscopy (SEM) images exhibited the root hair-like nanostructure of water cabbage leaf and single comb-like nanostructure of purple bauhinia leaf. In spite of copper coating, the leaf surfaces of water cabbage and purple bauhinia were black and exhibited excellent light absorption at visible and near infrarrred wavelengths. It was estimated that these two types of leaves could absorb roughly 90% of light. Finite-difference time-domain (FDTD) calculations predicted the low reflectance stemming from the leaf nanostructures and copper coating layer. Because of the low cost of copper as a coating metal and simple procedure, this can be a promising method for quick fabrication of a thin copper film on the leaf nanostructure for application in blackbody or as the light absorbers.