The present paper describes rotations of C60 fullerene molecules in the solid phase of a fullerite. The conducted studies show that these relatively large molecules rotate according to the same laws as macroscopic bodies, i.e., according to the laws of classical mechanics. The performed calculations confirm that fullerene rotations do not cause friction. We suggest a method for a strong increase in the internal energy of the material that does not lead to its destruction. It is theoretically shown that in standard fullerite, in the absence of electric and magnetic fields, fullerene rotations occur with an average angular frequency of 0.34·× 1012 rad·s−1, which is consistent with the experimental data obtained using nuclear magnetic resonance. By means of calculations, we found that alternating magnetic fields of a certain configuration wind fullerenes encapsulated by iron. In this case, two temperatures arise in the fullerite crystal: a high rotational temperature and a vibrational temperature close to normal. For the purpose of determining this velocity, as well as the nature of rotations, the present paper suggests a way of integrating the dynamic Euler equations for the projections of a molecule’s angular velocity vector onto the coordinate axes associated with the fullerene. The stages of computer simulation of fullerene movements, which was carried out without using previously developed packages of molecular-dynamic modelling, are consistently described.
Hydrogen accumulation and distribution in pipeline steel under conditions of enhanced corrosion has been studied. The XRD analysis, optical spectrometry and uniaxial tension tests reveal that the corrosion environment affects the parameters of the inner and outer surface of the steel pipeline as well as the steel pipeline bulk. The steel surface becomes saturated with hydrogen released as a reaction product during insignificant methane dissociation. Measurements of the adsorbed hydrogen concentration throughout the steel pipe bulk were carried out. The pendulum impact testing of Charpy specimens was performed at room temperature in compliance with national standards. The mechanical properties of the steel specimens were found to be considerably lower, and analogous to the properties values caused by hydrogen embrittlement.