Herein, we present a new type of high-performance catalyst for aerobic oxidation of organosulfur compounds based on tungsten carbide. The synthesis of tungsten carbide was performed via microwave irradiation of the precursors, which makes it possible to obtain a catalyst in just 15 min. The synthesized catalyst was investigated by a variety of physicochemical methods: X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, electron microscopy, and N2 adsorption/desorption. It was shown that active centers containing tungsten in the transition oxidation state (+4) play a key role in the activation of oxygen. The main factors influencing the conversion of dibenzothiophene (DBT) were investigated. It should be noted that 100% conversion of DBT can be achieved under relatively mild conditions: 120 °C, 3 h, 6 bar, and 0.5% wt catalyst. The catalyst retained its activity for at least six oxidation/regeneration cycles. The simplicity and speed of synthesis of the proposed catalyst in combination with its high activity and stability open broad prospects for its further use both for oxidative desulfurization and for other reactions of aerobic oxidation of organic substrates.
Nanosized molybdenum carbide (β-Mo2C) synthesized by microwave irradiation method was applied for catalytic hydrogenation of naphthalene. Varying the synthesis conditions affects not only the phase composition and physicochemical properties of the resulting carbide but also makes it possible to regulate the selectivity for hydrogenation products. Samples synthesized in a short time (1-4 min) contain more acid sites due to the presence of molybdenum oxide and allow deeper hydrogenation of naphthalene to decalin compared to a pure-phase molybdenum carbide sample. The catalysts were characterized by XRD, nitrogen adsorption-desorption, SEM, TEM, XPS, and NH3-TPD. The key factors influencing the naphthalene hydrogenation were investigated. Under optimal conditions 100 % naphthalene conversion was obtained: 4 MPa hydrogen pressure, 1 h, 350 °C, catalyst Mo2C-4min-mono. The catalyst retains its activity for at least 5 cycles of hydrogenation.
Rare-earth hexaborides (RB 6 ) are promising materials for photonic and electronic applications in modern technology. However, the known methods of synthesis of RB 6 s are challenging due to their complexities and nuances, usually requiring high temperatures, long synthesis durations and complicated by the use of complex precursors. This paper reports the development of an energy-efficient and straightforward microwave-assisted synthesis (MS) method. The series of rare-earth metal hexaboride powders RB 6 (R = La, Ce, Nd and Sm) have been prepared by the MS method in a dramatically short times (synthesis duration is 10 minutes). For the synthesis, easily available raw materials (lanthanide oxides and boron) were used, although the reactions R 2 O 3 /B → RB 6 are thermodynamically prohibited (except CeO 2 /B system). The x-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis show that all hexaborides are cubic phases with high crystallinity. Although the shapes are similar, the sizes are in the range of 1 to 10 μm. being different for each of the formulations.