Use of bricks and their manufacturing process plays an important role in the construction sector. Despite its various methods of manufacturing, still large quantities of bricks are used in the building construction. Manufacturing of bricks consumes large quantities of natural resources, and it is energy intensive. Similarly, due to rapid industrialization large quantities of waste industrial byproducts are generated and causes handling and disposal challenges of these wastes. This review work attempts the possibilities and potential use of various types of waste industrial byproducts in fired and unfired bricks. This study also highlights the importance of waste and its usage guidelines in bricks manufacturing to enhance the strength and durability properties. To overcome the challenges associated with bricks manufacturing, firing is still considered as the most preferred method of making bricks. Use of industrial waste byproducts to the mix matrix of fire and unfired bricks will overcome the disposal challenges and reduce the depletion of natural resources. Since sustainability is a key factor that is considered when it comes to making bricks, innovative methods are needed to produce them using sustainable materials. The production and application of bricks and their usage guidelines are reviewed further in various aspects such as environment, social, economic, and technology to meet global standards and policies of the local government for sustainable development.
1 July 2024 in Environmental Science and Pollution Research
This study evaluates the performance of alkali‐activated blocks (AABs) incorporating fly ash (FA) and ceramic tile dust (CTD) in different mix proportions, utilizing a sodium silicate (SS) and sodium hydroxide (SH) alkali activator solution with fixed molarity and specific ratio, while maintaining a constant liquid‐to‐binder ratio. The newly developed AABs were subjected to comprehensive testing to evaluate their physical, mechanical, durability, and thermal properties. The key design parameters, including bulk density (1850–2120 kg/m 3 ), compressive strength (16–46 MPa), water absorption (4%–10%), and thermal conductivity (0.975–1.23 W/m.K), were evaluated. The optimal mix formulation was identified as 30% replacement of FA with CTD, as it provided the best balance of mechanical properties and sustainability. Furthermore, the performance of the binary blended AABs was compared to that of FA‐based AABs, showing superior performance in key properties such as compressive strength and thermal conductivity. In conclusion, this study highlights the significant potential of CTD as an industrial by‐product for the development of sustainable masonry construction. The findings underscore the positive attributes of binary blended AABs and emphasize their enhanced performance compared to FA‐based AABs. By utilizing CTD and FA, these innovative AABs contribute to the utilization of industrial waste materials, thereby promoting environmentally friendly construction practices.