Lithium metal anodes have been pursued for decades as a way to significantly increase the energy density of lithium-ion batteries. However, safety risks caused by flammable liquid electrolytes and short circuits due to lithium dendrite formation during cell cycling have so far prevented the use of lithium metal in commercial batteries. Solid polymer electrolytes (SPEs) offer a potential solution if their mechanical properties and ionic conductivity can be simultaneously engineered. Here, we introduce a family of SPEs that are scalable and easy to prepare with a photopolymerization process, synthesized from amphiphilic acrylic polymer conetworks based on poly(ethylene glycol), 2-hydroxy-ethylacrylate, norbornyl acrylate, and either lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) or a single-ion polymethacrylate as lithium-ion source. Several conetworks were synthesized and cycled, and their ionic conductivity, mechanical properties, and lithium transference number were characterized. A single-ion-conducting polymer electrolyte shows the best compromise between the different properties and extends the calendar life of the cell.

Creation of color through photonic morphologies manufactured by molecular self‐assembly is a promising approach, but the complexity and lack of robustness of the fabrication processes have limited their technical exploitation. Here, it is shown that photonic spheres with full‐color tuning across the entire visible spectrum can be readily and reliably achieved by the emulsification of solutions containing a block copolymer (BCP) and two swelling additives. Solvent diffusion out of the emulsion droplets gives rise to 20–150 µm‐sized spheres with an onion‐like lamellar morphology. Controlling the lamellar thickness by differential swelling with the two additives enables color tuning of the Bragg interference‐based reflection band across the entire visible spectrum. By studying five different systems, a set of important principles for manufacturing photonic colloids is established. Two swelling additives are required, one of which must exhibit strong interactions with one of the BCP blocks. The additives should be chosen to enhance the dielectric contrast, and the formation kinetics of the spheres must be sufficiently slow to enable the emergence of the photonic morphology. The proposed approach is versatile and robust and allows the scalable production of photonic pigments with possible future applications in inks for cosmetics and arts, coatings, and displays.

The role of interfacial effects on an ion-conducting poly(styrene-b-ethylene oxide) (PS-b-PEO or SEO) diblock copolymer doped with lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) was investigated by electrochemical impedance spectroscopy (EIS). Coating the surface of commonly used stainless steel electrodes with a specific random copolymer brush increases the measured ionic conductivity by more than an order of magnitude compared to the uncoated electrodes. The increase in ionic conductivity is related to the interfacial structure of the block copolymer domain morphology on the electrode surface. We show that the impedance associated with the electrode–electrolyte interface can be detected using nonmetallic electrodes, allowing us to distinguish the ionic conductivity behaviors of the bulk electrolyte and the interfacial layers for both as-prepared and annealed samples.