The problem of path planning method is regarded as one of the key bottlenecks in the robotic belt grinding system. It has a significant impact on the surface quality of processed workpieces with complex surfaces. To improve the surface quality, a novel path planning method is proposed in this paper, which generates the grinding path containing both the grinding position and orientation for an industrial robot. Firstly, the theoretical grinding trajectory is obtained by selecting the key contact points on the three-dimensional model and calculating the inverse solutions of the B-spline curves. Next, based on the curvature variation rate and curve length criterion, the key contact points are further refined to produce the target points in the sensitive area of the workpiece where surface curvature changes abruptly or surfaces intersect. Finally, the grinding orientation at each target point location is obtained according to the solutions of the surface equation constructed using bicubic B-spline interpolation. To validate the method, a faucet is used for contrast simulation and experiment. The results demonstrate that the proposed method performs better than the section method in terms of both planning efficiency and surface quality. With this method, the surface roughness value Ra of the processed workpiece can be controlled within 0.086 um without the risk of over-cut, which is ideal for robotic belt grinding.
24 June 2019 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
China Bearing Reducer (CBR) is a one-stage cycloid speed reducer, which has the advantages of large transmission ratio, large load, high precision, high stiffness, and compact structure. The profile modification quality and manufacturing error of cycloid gear are the key factors affecting the transmission accuracy. In this paper, the structure of CBR is introduced first. By means of tooth contact analysis, a new parabolic profile modification method is proposed to improve the transmission accuracy. Then, by using Hertzian contact theory, force equilibrium equations and deformation compatibility conditions, a loaded tooth contact analysis algorithm of CBR is proposed to analyze the loaded transmission characteristics. According to the designed manufacturing error, the objective function is established to minimize the transmission error under nonload condition, and the particle swarm optimization algorithm is used to solve the optimal modification coefficients. Finally, the CBR25 is manufactured with the optimum modification coefficients, and the manufacturing error is measured in coordinate measuring machine to verify that it meets the design requirements. The optimal modification coefficients of CBR25 under nonload are solved based on particle swarm optimization model. Then the optimal modification coefficients are substituted to loaded tooth contact analysis to analyze the meshing contact force, contact deformation, and transmission error of CBR25. The transmission error of the CBR25 is tested on the testing rig. The error between the measured results and the calculated results of loaded tooth contact analysis is within 5%, which shows the correctness of the loaded tooth contact analysis algorithm. At the same time, the operation stability of the CBR25 is improved by using the optimal modification method.