We consider a trainable point-to-point communication system, where both transmitter and receiver are implemented as neural networks (NNs), and demonstrate that training on the bit-wise mutual information (BMI) allows seamless integration with practical bit-metric decoding (BMD) receivers, as well as joint optimization of constellation shaping and labeling. Moreover, we present a fully differentiable neural iterative demapping and decoding (IDD) structure which achieves significant gains on additive white Gaussian noise (AWGN) channels using a standard 802.11n low-density parity-check (LDPC) code. The strength of this approach is that it can be applied to arbitrary channels without any modifications. Going one step further, we show that careful code design can lead to further performance improvements. Lastly, we show the viability of the proposed system through implementation on software-defined radios (SDRs) and training of the end-to-end system on the actual wireless channel. Experimental results reveal that the proposed method enables significant gains compared to conventional techniques.

The choice of constellations largely affects the performance of communication systems. When designing constellations, both the locations and probability of occurrence of the points can be optimized. These approaches are referred to as geometric and probabilistic shaping, respectively. Usually, the geometry of the constellation is fixed, e.g., quadrature amplitude modulation (QAM) is used. In such cases, the achievable information rate can still be improved by probabilistic shaping. In this work, we show how autoencoders can be leveraged to perform probabilistic shaping of constellations. We devise an information theoretical description of autoencoders, which allows learning of capacity-achieving symbol distributions and constellations. Recently, machine learning techniques to perform geometric shaping were proposed. However, probabilistic shaping is more challenging as it requires the optimization of discrete distributions. Furthermore, the proposed method enables joint probabilistic and geometric shaping of constellations over any channel model. Simulation results show that the learned constellations achieve information rates very close to capacity on an additive white Gaussian noise (AWGN) channel and outperform existing approaches on both AWGN and fading channels.

This paper uses the reconstruction-computation-quantization (RCQ)paradigm to decode low-density parity-check (LDPC) codes. RCQ facilitates dynamic non-uniform quantization to achieve good frame error rate (FER) performance with very low message precision. For message-passing according to a flooding schedule, the RCQ parameters are designed by discrete density evolution. Simulation results on an IEEE 802.11 LDPC code show that for 4-bit messages, a flooding Min Sum RCQ decoder outperforms table-lookup approaches such as information bottleneck (IB) or Min-IB decoding, with significantly fewer parameters to be stored. Additionally, this paper introduces layer-specific RCQ, an extension of RCQ decoding for layered architectures. Layer-specific RCQ uses layer-specific message representations to achieve the best possible FER performance. For layer-specific RCQ, this paper proposes using layered discrete density evolution featuring hierarchical dynamic quantization (HDQ) to design parameters efficiently. Finally, this paper studies field-programmable gate array (FPGA) implementations of RCQ decoders. Simulation results for a (9472, 8192) quasi-cyclic (QC) LDPC code show that a layered Min Sum RCQ decoder with 3-bit messages achieves more than a 10% reduction in LUTs and routed nets and more than a 6% decrease in register usage while maintaining comparable decoding performance, compared to a 5-bit offset Min Sum decoder.

In this paper, we investigate sub-6 GHz V2X sidelink positioning scenarios in 5G vehicular networks through a comprehensive end-to-end methodology encompassing ray-tracing-based channel modeling, novel theoretical performance bounds, high-resolution channel parameter estimation, and geometric positioning using a round-trip-time (RTT) protocol. We first derive a novel, approximate Cramér-Rao bound (CRB) on the connected road user (CRU) position, explicitly taking into account multipath interference, path merging, and the RTT protocol. Capitalizing on tensor decomposition and ESPRIT methods, we propose high-resolution channel parameter estimation algorithms specifically tailored to dense multipath V2X sidelink environments, designed to detect multipath components (MPCs) and extract line-of-sight (LoS) parameters. Finally, using realistic ray-tracing data and antenna patterns, comprehensive simulations are conducted to evaluate channel estimation and positioning performance, indicating that sub-meter accuracy can be achieved in sub-6 GHz V2X with the proposed algorithms.

In high-throughput applications, low-complexity and low-latency channel decoders are inevitable. Hence, for low-density parity-check (LDPC) codes, message passing decoding has to be implemented with coarse quantization—that is, the exchanged beliefs are quantized with a small number of bits. This can result in a significant performance degradation with respect to decoding with high-precision messages. Recently, so-called information-bottleneck decoders were proposed which leverage a machine learning framework (i.e., the information bottleneck method) to design coarse-precision decoders with error-correction performance close to high-precision belief-propagation decoding. In these decoders, all conventional arithmetic operations are replaced by look-up operations. Irregular LDPC codes for next-generation fiber optical communication systems are characterized by high code rates and large maximum node degrees. Consequently, the implementation complexity is mainly influenced by the memory required to store the look-up tables. In this paper, we show that the complexity of information-bottleneck decoders remains manageable for irregular LDPC codes if our proposed construction approach is deployed. Furthermore, we reveal that in order to design information bottleneck decoders for arbitrary degree distributions, an intermediate construction step which we call message alignment has to be included. Exemplary numerical simulations show that incorporating message alignment in the construction yields a 4-bit information bottleneck decoder which performs only $0.15$ dB worse than a double-precision belief propagation decoder and outperforms a min-sum decoder.