We propose a new hollow-core fiber design based on a hybrid structure of nested elliptical and semicircular tubes. We numerically investigate the loss and single-mode performance of this design in the communication band and derive the values of each parameter of the fiber cladding structure that theoretically lead to the best performance of the fiber. The resulting structure has a minimum confinement loss as low as 0.00033 dB/km at 1550 nm and an astonishing extinction ratio of 2,439,607 for the higher-order modes, showing excellent loss and single-mode performance. In addition, the design also exhibits excellent bending insensitivity, with the loss gradually dropping well below 0.01 dB/km when the bending radius exceeds 14 cm. The proposed fiber structure has a very promising application in optical communication systems.
Directly modulated VCSEL transmitters are widely deployed in short-reach optical interconnects, yet further scaling of per-lane symbol rates in AI/HPC datacenter fabrics demands modulation beyond the practical limits of direct current modulation. We demonstrate a laterally integrated VCSEL–electro-absorption modulator (EAM) transmitter enabled by resonance-detuned coupling on an oxide-confined half-VCSEL platform. A localized 20 nm surface etch produces >5 nm resonance detuning, confirmed by measured spectra and supported by transfer-matrix and mode-matching simulations, which indicate strong slow-light-assisted lateral coupling into the modulator. Experimentally, the measured spectra confirm an 5 nm resonance separation. Static characterization shows a coupling ratio of 63% extracted from near-field profiles and an extinction ratio of 4 dB (based on modulator-side power) under a −2 V modulator bias, with an apparent 1 mW absorption at a 6 mA VCSEL drive current. Dynamic measurements demonstrate a small-signal 3-dB bandwidth of approximately 23 GHz and clear NRZ eye openings at 25 Gb/s and 30 Gb/s. These results validate resonance-detuned lateral integration as a compact and manufacturable approach to VCSEL-based externally modulated transmitters for next-generation short-reach interconnects.
Directly modulated VCSEL transmitters are widely deployed in short-reach optical interconnects. However, further scaling of per-lane symbol rates in AI/HPC data center fabrics requires modulation schemes beyond the practical limits of direct current modulation. We demonstrate a laterally integrated VCSEL–electro-absorption modulator (EAM) transmitter enabled by resonance-detuned coupling on an oxide-confined half-VCSEL platform. A localized 20 nm surface etch produces > 5 nm resonance detuning, confirmed by measured spectra and supported by transfer-matrix and mode-matching simulations, which indicate strong slow-light-assisted lateral coupling into the modulator. Experimentally, the measured spectra confirm a 5 nm resonance separation. Static characterization shows a coupling ratio of 63% extracted from near-field profiles and an extinction ratio of 4 dB (based on modulator-side power) under a −2 V modulator bias, with an apparent 1 mW absorption at a 6 mA VCSEL drive current. Dynamic measurements demonstrate a small-signal 3 dB bandwidth of approximately 23 GHz and clear NRZ eye openings at 25 Gbps and 30 Gbps. These results validate resonance-detuned lateral integration as a compact and manufacturable approach to VCSEL-based externally modulated transmitters for next-generation short-reach interconnects.