Lead halide perovskite nanocrystals (PNCs) have very recently emerged as promising emitters for their superior optoelectronic properties. However, the defects in perovskite itself make it susceptible to the external environment and internal ion migration, resulting in low photoluminescence quantum yield (PLQY) and poor device efficiency. Herein, we developed a method to reduce the surface defects of PNCs by introducing ammonium acetate in the synthesis of CsPbI3 PNCs. The addition of ammonium acetate can effectively eliminate undesired surface metallic lead cations and dangling bonds, resulting in an enhanced PLQY and stability. The passivated PNCs have an overall up-shift energy level, demonstrating better hole injection efficiency. As a result, the red light-emitting diodes (LEDs) fabricated with the passivated CsPbI3 PNCs achieved an optimal EQE of 10.6% and a maximum brightness of 981 cd m−2, which are 3.1 and 2.4 times that of unpassivated PNCs based devices, respectively.
This work reported a highly sensitive ethanol sensor assembled from raspberry-like hierarchical Ce-doped WO3 nanoparticles. The Ce-doped WO3 nanoparticles doped with different contents (0, 2, 4 and 8 at%) of Ce were synthesized by a facile hydrothermal method. The crystalline structure and the micromorphology of Ce-doped WO3 nanoparticles were measured by x-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM), respectively. The x-ray photoelectric spectroscopy (XPS) and transmission electron microscopy (TEM) attached with energy-dispersive spectroscopy (EDS) confirmed the elemental distribution and the chemical state of surface elements. Comparison between the pristine and Ce-doped WO3 samples revealed that the doping of Ce on WO3 can powerfully improve the response ability to ethanol. As the doping content of Ce element was 4 at%, the sensor exhibited optimal response to ethanol in the range of 0.1–50 ppm at the working temperature of 350 °C. The response can achieve a high value of 12.3 for detecting 1 ppm ethanol with a fast response/recovery (6s/6s). Impressively, the sensor still maintained a good response (8.1) to ethanol even at sub-ppm level (0.1 ppm ethanol). This work will pave a platform for design and development of highly sensitive ethanol sensors.
In this work, coral-like indium oxide was synthesized via an environmentally friendly one-step solvothermal method. The as-synthesized samples were characterized using X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). The results indicate that the synthesized indium oxide nanorods were formed of nanoparticles. Moreover, the gas sensing properties of the coral-like products were investigated, and they exhibited high response and good selectivity to NO2.
Halide perovskite quantum dots (PQDs) are potential luminescent materials for display and LED illumination, whereas CsPbCl3 quantum dots (QDs) exhibit was low luminescence quantum yields (QYs), limiting their wide applications in practice. In this work, the Mn2+ and Eu3+ doped all-inorganic CsPbCl3 QDs were prepared, which were encapsulated into the SiO2 film to form ultra-stable and high-luminescent CsPbCl3/SiO2 composites. Through silica coating, surface defects of the composites were reduced effectively, leading to the increase in the luminescence QYs of the CsPbxEu1-xCl3 from 3.52% to 49.00%, and CsPbxMn1-xCl3 from 21.01% to 50.84%.