GEORGIOS MOYSIADIS

Mr. GEORGIOS MOYSIADIS

orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 January 2026 in Aerospace
Verified
Journal Article
Open access
PDF file
GMGEORGIOS MOYSIADIS
GEORGIOS MOYSIADIS
SKSavvas Koltsakidis
Savvas Koltsakidis
OZOdysseas Ziogas
Odysseas Ziogas
PPPericles Panagiotou
Pericles Panagiotou
Dimitrios TzetzisDimitrios Tzetzis
Dimitrios Tzetzis
Unmanned Aerial Vehicles (UAVs) have become indispensable tools, playing a pivotal role in diverse applications such as rescue missions, agricultural surveying, and air defense. They significantly reduce operational costs while enhancing operator safety, enabling new strategies across multiple domains. The growing demand for UAVs calls for structural components that are not only robust and lightweight, but also cost-efficient. This research introduces a novel approach that employs a pressure distribution map on the external surface of a UAV wing to optimize its internal structure through a variable-thickness TPMS (Triply Periodic Minimal Surface) design. Beyond structural optimization, the study explores a second novel approach with the use of filaments containing chemical blowing agents printed at different temperatures for both the infill and shell, producing varying porosities. As a result, the tailoring of density and weight is achieved through two different methods, and case studies were developed by combining them. Compared to the conventionally manufactured wing, a weight reduction of up to 7% was achieved while the wing could handle the aerodynamic loads under extreme conditions. Beyond enabling lightweight structures, the process has the potential to be substantially faster and more cost-effective, eliminating the need for molds and advanced composite materials such as carbon fiber sheets.

Verified
Journal Article
Open access
PDF file
SKSavvas Koltsakidis
Savvas Koltsakidis
MMMathis Moullec
Mathis Moullec
GMGEORGIOS MOYSIADIS
GEORGIOS MOYSIADIS
Dimitrios TzetzisDimitrios Tzetzis
Dimitrios Tzetzis
Additive manufacturing enables the fabrication of personalized protective equipment with locally tailored mechanical properties. In this work, a low-cost scan-to-print workflow is proposed for the fused filament fabrication (FFF) of personalized dual-zone shin guards combining a stiff outer load-distribution layer with a compliant inner energy-absorbing layer. Subject-specific leg geometry was acquired via structured-light 3D scanning and used to design a shin guard with two 3.5 mm thick zones (total thickness 7 mm). Foamable filaments of PLA, ASA, and TPU were employed to manufacture unfoamed and foamed regions by controlling extrusion temperature. Mechanical performance was assessed through three-point bending tests and dynamic finite element impact simulations. Unfoamed PLA and ASA exhibited flexural strengths of approximately 88 MPa and 72 MPa, respectively, while foaming reduced these values by about 74%. Dual-zone configurations partially restored stiffness, reaching 41 MPa for PLA and 29 MPa for ASA. TPU showed lower flexural stresses with a smaller reduction of 23% upon foaming. Impact simulations revealed maximum deformations of 1.97 mm and 2.02 mm for PLA and ASA outer zones, respectively, while TPU exhibited large deformations leading to penetration of the 3.5 mm thick inner layer. The results demonstrate that dual-zone designs manufactured via foaming-enabled FFF can effectively balance stiffness, weight, and impact response for personalized shin guard applications.