Voyage optimization is a practice to select the optimum route for the ship operators to increase energy efficiency and reduce Green House Gas emission in the shipping industry. An accurate prediction of ship operational performance is the prerequisite to achieve these targets. In this paper, a modified Kwon׳s method was developed to predict the added resistance caused by wave and wind for a specific ship type, and an easy-to-use semi-empirical ship operational performance prediction model is proposed. It can accurately predict the ship׳s operational performance for a specific commercial ship under different drafts, at varying speeds and in varying encounter angles, and then enables the user to investigate the relation between fuel consumption and the various sea states and directions that the ship may encounter during her voyage. Based on the results from the operational performance prediction model and real time climatological information, different options for the ship׳s navigation course can be evaluated according to a number of objectives, including: maximizing safety and minimizing fuel consumption and voyage time. By incorporating this into a decision support tool, the ship׳s crew are able to make an informed decision about what is the best course to navigate.In this study the Energy Efficiency of Operation (EEO) is defined as an indicator to illustrate the ratio of main engine fuel consumption per unit of transport work. Two case studies are carried out to perform the prediction of ship operational performance for Suezmax and Aframax Oil Tankers, and the results indicate that the semi-empirical ship operational performance prediction model provides extremely quick calculation with very reasonable accuracy, particularly considering the uncertainties related to the parameters of interest for the case study data. Within the case studies, the additional fuel consumption caused by the combined hull and propeller fouling and engine degradation is included in the model as a time-dependent correction factor. The factor may assist the ship owner/operator to determine the hull coating selection, and/or the dry-docking and main engine maintenance strategy

In April 2018, the International Maritime Organisation adopted an ambitious plan to contribute to the global efforts to reduce the Greenhouse Gas emissions, as set by the Paris Agreement, by targeting a 50% reduction in shipping’s Green House Gas emissions by 2050, benchmarked to 2008 levels. To meet these challenging goals, the maritime industry must introduce environmentally friendly fuels with negligible, or low SO_X, NO_X and CO₂ emissions. Ammonia use in maritime applications is considered promising, due to its high energy density, low flammability, easy storage and low production cost. Moreover, ammonia can be used as fuel in a variety of propulsors such as fuel cells and can be produced from renewable sources. As a result, ammonia can be used as a versatile marine fuel, exploiting the existing infrastructure, and having zero SO_X and CO₂ emissions. However, there are several challenges to overcome for ammonia to become a compelling fuel towards the decarbonisation of shipping. Such factors include the selection of the appropriate ammonia-fuelled power generator, the selection of the appropriate system safety assessment tool, and mitigating measures to address the hazards of ammonia. This paper discusses the state-of-the-art of ammonia fuelled fuel cells for marine applications and presents their potential, and challenges.