High-crystalline-quality wide-bandgap metal halide perovskite materials that achieve superior performance in perovskite solar cells (PSCs) have been widely explored. Precursor concentration plays a crucial role in the wide-bandgap perovskite crystallization process. Herein, we investigated the influence of precursor concentration on the morphology, crystallinity, optical property, and defect density of perovskite materials and the photoelectric performance of solar cells. We found that the precursor concentration was the key factor for accurately controlling the nucleation and crystal growth process, which determines the crystallization of perovskite materials. The precursor concentration based on Cs0.05FA0.8MA0.15Pb(I0.84Br0.16)3 perovskite was controlled from 0.8 M to 2.3 M. The perovskite grains grow larger with the increase in concentration, while the grain boundary and bulk defect decrease. After regulation and optimization, the champion PSC with the 2.0 M precursor concentration exhibits a power conversion efficiency (PCE) of 21.13%. The management of precursor concentration provides an effective way for obtaining high-crystalline-quality wide-bandgap perovskite materials and high-performance PSCs.
Heavily Yb-doped (14300 ppm) preforms and fibers were prepared by the sol-gel method and dip coating-rapid thermal annealing technique. Optical properties of these preforms and fibers were measured and discussed. A fiber laser at a 1053-nm wavelength was realized and its slope efficiency was measured to be 88.4%. The excellent performance of the fiber laser and repeatability show that the novel approach described in this paper is capable of providing low-cost high-level rare earth-doped fibers for amplifiers and fiber lasers.
Two nonlinear optical crystals, BaVO(IO3)5 and BaTaO(IO3)5, are designed by substituting Nb with V and Ta, respectively, in BaNbO(IO3)5, which is itself a recently synthesized infrared nonlinear optical (NLO) material. The designs of BaVO(IO3)5 and BaTaO(IO3)5 from BaNbO(IO3)5 are based on the following motivation: BaVO(IO3)5 should have a larger second-harmonic generation (SHG) coefficient than BaNbO(IO3)5, as V will result in a stronger second-order Jahn-Teller effect than Nb due to its smaller ion radius; at the same time, BaTaO(IO3)5 should have a larger laser-damage threshold, due to the fact that Ta has a smaller electronegativity leading to a greater band-gap. Established on reliable first-principle calculations, it is demonstrated that BaVO(IO3)5 has a much larger SHG coefficient than BaNbO(IO3)5 (23.42 × 10−9 vs. 18.66 × 10−9 esu); and BaTaO(IO3)5 has a significantly greater band-gap than BaNbO(IO3)5 (4.20 vs. 3.55 eV). Meanwhile, the absorption spectra and birefringences of both BaVO(IO3)5 and BaTaO(IO3)5 are acceptable for practice, suggesting that these two crystals can both be expected to be excellent infrared NLO materials.
Single-nanowire solar cells with a unique light-concentration property are expected to exceed the Shockley–Queisser limit. The architecture of single nanowire is an important factor to regulate its optical performance. We designed a trilobal silicon nanowire (SiNW) with two equivalent scales that possesses superior light-absorption efficiency in the whole wavelength range and shows good tolerance for incident angle. The electric field distribution in this geometry is concentrated in the blade with small equivalent scale and pivot with large equivalent scale, respectively, in the short wavelength range and long wavelength range. Corresponding good light absorption of trilobal SiNW in the two wavelength ranges leads to stronger total light-absorption capacity than that of cylindrical SiNW. Trilobal single-nanowire solar cells can obtain a short-circuit current density ( ) of , which provides a new choice for designing single nanowire with excellent light-capture capability.