This study investigates the thermal decomposition, ignition, combustion, and gasification processes of composite fuels derived from anthracite coal and pine sawdust. The research highlights the non-additive behavior of composite fuels, demonstrating enhanced reactivity and combustion efficiency compared to simple mixtures. Thermogravimetric analysis (TGA) revealed distinct stages of thermal decomposition, with composite fuels exhibiting combined processes of volatile release and coke residue decomposition, unlike mixtures. Ignition experiments in a vertical tubular furnace showed reduced flash delay times for composites, attributed to the formation of active surface centers during mechanical activation. Flare combustion studies confirmed more stable and complete combustion of composites, achieving higher temperatures and improved flame stability. Plasma gasification experiments indicated that composite fuels provide more uniform gas evolution, with higher yields of hydrogen (H2) and carbon monoxide (CO), while reducing nitrogen oxide (NO) emissions. The findings underscore the potential of composite fuels for optimizing energy efficiency and reducing environmental impact in coal-fired power plants, supporting the transition to sustainable energy solutions.
This experimental study investigates the combustion characteristics of mechanoactivated coal-biomass composite fuels (70% Kuznetsk bituminous coal / 30% sawdust) in a vortex combustion chamber. The setup employed a seven-section muffle combustion chamber with optical access, incorporating a two-stage burner with tangential and snail-type swirlers to ensure stable combustion initiation. Three distinct combustion phases were observed: chamber preheating (100 s), stable operation (reaching 1500°C), and natural cooling. Mechanochemical pretreatment significantly improved fuel performance, demonstrating complete O₂ consumption (minimum residual 1.9 vol%) and 70% burnout within the first meter of the chamber. Composite fuels outperformed raw mixtures, exhibiting higher steady-state temperatures (>1400°C across all regimes), reduced ignition delays, and a 30% reduction in activation energy (from 200 to 60 kJ/mol). The technology achieved stable oil-free ignition, with CO₂ peaking at full O₂ depletion while maintaining CO/H₂ emissions below 3%. These results validate mechanoactivation as an effective method for optimizing coal-biomass co-combustion in industrial boilers. Further research is required to refine temperature regimes, excess air ratios, and particle residence times. The study contributes essential data for advancing sustainable combustion systems utilizing renewable biomass resources.
Мақалада қатты органикалық отынның әртүрлі түрлерінің тұтану және жану процестерін зерттеуге қатысты мәселелер қарастырылды. Әртүрлі метаморфизм сатысындағы көмір, атап айтқанда қоңыр көмір, ағаш үгінділері, қоспа және олардың негізінде жасалған композит отыны ұнтақтау әдісіне байланысты өзгеретін кинетикалық сиппаттамалары зерттелді. Екі компонентті отынды дайындаудың жаңа әдісі ұсынылды. Салыстырмалы талдау композит отын мен қоспаның термиялық ыдырау процесі әртүрлі екенін көрсетті. Композитті отынның тұрақты жануы мен алауының жоғары температурасы бар болғандықтан жоғарғы сиппаттамаларға ие. Композиттік отынды жағу технологиясын енгізу жану процесінің сиппатамаларын жақсартуға, сондай-ақ экологиялық және экономикалық көрсеткіштерді жақсартуға мүмкіндік береді.