Design and development of a wireless charging system with metamaterial slabs for electric vehicles (EV) based on the Society of Automotive Engineers (SAE) standard is proposed in this paper. The objective is to study the effect of the metamaterial slab on wireless charging efficiency. The wireless charging system was set with a distance between the coils of 0.15 m and a resonant frequency of 81.64 kHz. The symmetrical metamaterial slab (SM) and the edge metamaterial slab (EM) were designed. The experiment varied the placement position of the metamaterial slab in four cases. The efficiency of the wireless power transfer system without the metamaterial slab (WOM) was the highest at 75.78% with the coils aligned. The position at which the coils are in alignment has the maximum efficiency. The efficiency tends to decrease when the coil is more misalignment. The EM over the receiver coil (EMR) results in a maximum efficiency of 75.87% at a 0.10 m misalignment. The EMR provides an efficiency that is 8.00% higher than the WOM at a misalignment of 0.20 m. The metamaterial slab is important in increasing the efficiency when the misalignment occurs. In addition, the metamaterial slab shields the magnetic fields over the receiver coil. The magnetic field of the WOM had an average value of 0.0216 mT. Therefore, the magnetic fields of the system are within safe exposure levels according to the International Commission for Non-Ionization Radiation Protection (ICNIRP) guidelines which are 0.1 mT for occupational exposure and 0.027 mT for general public exposure, respectively. The placement of metamaterial slabs can significantly impact the efficiency and safety of wireless power transfer systems.
The efficiency of power transfer is a critical issue for wireless charging applications in electric vehicles. The misalignment between the transmitter coil and the receiver coil in wireless charging leads to a significant reduction in efficiency. This article investigates improving coil misalignment performance in wireless power transfer for electric vehicles using magnetic flux density analysis. The objective is to study the effect of the automatic alignment transmitter system’s movement on error distance. The automatic alignment transmitter system was integrated with a wireless power transfer system to realign the transmitter coil whenever lateral misalignment occurred between the transmitter and receiver coils. The experiment was performed with a horizontal misalignment of 0.35 m and was repeated three times. The gap between the coils was held constant at 0.15 m. The wireless charging system was designed according to the Society of Automotive Engineers (SAE) standard. The experimental results demonstrated that the movement error distance was 0.001 m, with an average error of 0.33%. These findings indicate that the automatic alignment transmitter system achieved an operational effectiveness of 99.67%. The maximum wireless charging efficiencies of 75.78% and 75.59% were recorded for the X-axis and Y-axis adjustments, respectively.