Multifunctional photodetectors boost the development of traditional optical communication technology and emerging artificial intelligence fields, such as robotics and autonomous driving. However, the current implementation of multifunctional detectors is based on the physical combination of optical lenses, gratings, and multiple photodetectors, the large size and its complex structure hinder the miniaturization, lightweight, and integration of devices. In contrast, perovskite materials have achieved remarkable progress in the field of multifunctional photodetectors due to their diverse crystal structures, simple morphology manipulation, and excellent optoelectronic properties. In this review, we first overview the crystal structures and morphology manipulation techniques of perovskite materials and then summarize the working mechanism and performance parameters of multifunctional photodetectors. Furthermore, the fabrication strategies of multifunctional perovskite photodetectors and their advancements are highlighted, including polarized light detection, spectral detection, angle-sensing detection, and self-powered detection. Finally, the existing problems of multifunctional detectors and the perspectives of their future development are presented. "Image missing"
Perovskite single-crystal arrays have attracted intensive attention because of their great potentials for integrated optoelectronic devices. However, the traditional top-down lithography strategy requires complex processing and is detrimental to perovskite crystal structures, which is incompatible to directly pattern perovskite single crystals. Herein, we report a lithography-free method to realize the controllable growth of perovskite single-crystal arrays. Through introducing a printed hydrophilic-hydrophobic substrate into the crystallization system, the MAPbCl3 single-crystal arrays with precise location and uniform size are effectively fabricated. This method can be applied to prepare diverse perovskite single-crystal arrays, including MAPbBr3, CsPbCl3, CsPbBr3, Cs3Cu2I5, Cs3Bi2I9, and (BA)2(MA)3Pb4I11. The perovskite single crystals can be selectively grown on the electrodes to fabricate ultraviolet photodetectors. The strategy demonstrates a facile approach to fabricate large-scale perovskite single-crystal arrays and opens a pathway to produce diverse perovskite optoelectronic devices.
A facile approach to fabricate high-quality perovskite films and optoelectronic devices by pen-writing is reported. With perovskite material and graphite as the photosensitive layer and the electrode, perovskite photodetector arrays are written on paper.
Formamidinium–lead triiodide (FAPbI3) shows strong potential for high-performance photodetectors owing to its narrow band gap and superior thermal stability. However, fabrication of pure-phase α-FAPbI3 via a simple method remains challenging. Herein, a facile strategy based on antisolvent engineering is introduced to obtain pure-phase FAPbI3 perovskite films by incorporating 3,5-difluorobenzylamine (DFBZ) into one-step antisolvent chlorobenzene. The findings reveal that the DFBZ molecule can effectively control the crystallization of perovskite and improve α phase stability of FAPbI3 perovskite. The perovskite films incorporating DFBZ exhibit a more uniform and denser surface morphology as well as prolonged carrier lifetime. The resulting photodetectors demonstrate a broad spectral response from 300 to 850 nm, with a responsivity of up to 0.49 A W-1 at 770 nm. The DFBZ molecule can effectively passivate perovskite crystal defects and also improve the stability of perovskite films. The optimized devices retain approximately 90% of their initial performance after storage in air environment of 25 °C and a relative humidity of 30% for 400 h. The strategy provides an effective route to prepare stable pure-phase α-FAPbI3 perovskite films and broadband photodetectors.
Owing to its narrow bandgap and excellent thermal stability, formamidinium–lead triiodide (FAPbI3) is a promising perovskite for high-performance, wide-spectrum photodetectors. Here, we selected long-chain n-heptanoic acid as the passivating agent and introduced it onto the perovskite surface via post-treatment, thereby enabling the fabrication of high-quality α-FAPbI3 perovskite films and photodetectors. It is found that the carboxylic acid group in the n-heptanoic acid molecule can effectively passivate crystal defects, greatly reduce the density of defect states in the perovskite film, and inhibit the non-radiative recombination of carriers. The α-FAPbI3 perovskite phase was effectively stabilized. The responsivity of the photodetector optimized by n-heptanoic acid is as high as 0.47 A W−1 at 740 nm. At the same time, the optimized device still maintains 95% of its initial performance after 552 h of storage in an air environment with a room temperature of 25 °C and a relative humidity of 25%. This method provides a reliable way to prepare a high-performance and stable α-FAPbI3 photodetector.