I. Yurtdas

Dr. I. Yurtdas


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2007 in Journal of Engineering Mechanics
Verified
Journal Article
Closed access
DCDa Chen
Da Chen
IYI. Yurtdas
I. Yurtdas
NBN. Burlion
N. Burlion
JSJianfu Shao
Jianfu Shao
This paper deals with experimental investigation and numerical modeling of drying effects on the mechanical behavior of cement-based materials. First, the main results from an experimental study on the mechanical behavior (failure strength, induced damage, and plastic deformation) of a mortar subjected to the desiccation process are presented. Then, a coupled elastoplastic damage model is proposed to describe the mechanical behavior of cement-based materials subjected to tensile and compressive stresses. A particular emphasis is put on the pressure sensitivity of plastic flow and damage evolution. Capillary effects on mechanical behavior due to desiccation have been taken into account in the framework of partially saturated porous media. Finally, numerical simulations and experimental data are compared in order to verify the capacity of the model to reproduce the basic characteristics of the mortar in saturated and unsaturated conditions.

26 August 2014 in Materials and Structures
Verified
Journal Article
Closed access
PDF file
IYI. Yurtdas
I. Yurtdas
NBN. Burlion
N. Burlion
JSJianfu Shao
Jianfu Shao

1 September 2009 in Canadian Journal of Civil Engineering
Verified
Journal Article
Closed access
JSJ. Shen
J. Shen
IYI. Yurtdas
I. Yurtdas
CDC. Diagana
C. Diagana
ALA. Li
A. Li
Some mix-design methods for self-compacting concrete (SCC) have been proposed since the 1990s, but these methods do not address all practical needs. This paper proposes a method that enables the composition of SCC to be designed for a given strength (in this study, from 10 to 50 MPa at age 1 day or from 30 to 70 MPa at age 28 days). In this method, the compressive strength of SCC at an early age is considered an important parameter to answer the needs of the precast industry. The proposed mix-design method is based on optimizing the packing density of aggregates and ensuring the necessary quantity of paste to fill the voids between aggregates and to provide good fluidity of the SCC. The compressive strength of SCC can be estimated according to the Bolomey formula, and the quantity of superplasticizer can be determined by the proposed method.

6 September 2021 in Materials and Structures
Verified
Journal Article
Closed access
PDF file
IYI. Yurtdas
I. Yurtdas
NLN. Leklou
N. Leklou

20 July 2023 in Mechanics of Time-Dependent Materials
Verified
Journal Article
Closed access
PDF file
IYI. Yurtdas
I. Yurtdas

7 May 2019 in European Journal of Environmental and Civil Engineering
Verified
Journal Article
Closed access
IYI. Yurtdas
I. Yurtdas
SXS.Y. Xie
S.Y. Xie
NBN. Burlion
N. Burlion
JSJianfu Shao
Jianfu Shao
JSJ. Saint-Marc
J. Saint-Marc
AGA. Garnier
A. Garnier
The purpose of this experimental study is to highlight the effects of leaching (by ammonium nitrate solution) on time-dependent behaviour of an oil-well cement paste under the temperature of 90 °C. Uncoupled creep tests on sound and leached samples and coupled chemo-mechanical creep tests on initially sound samples are performed under confining pressure of 3 and 10 MPa. Leaching significantly increases the porosity and the compaction of the material and weakens its mechanical properties. Compared to sound material, leached material has higher instantaneous and creep strains which are both amplified with confining pressure. Leaching very quickly generates tertiary creep and failure of the sample under confining pressure of 3 MPa due to how easily the ammonium nitrate solution permeates into the sample. However, the increase of confining pressure to 10 MPa slows down the penetration of the ammonium nitrate solution into the sample and the tertiary creep is not observed during the time of testing. Such coupling has to be taken into account in the evaluation of long-term behaviour.