Models of electrical equipment components are the basis of the transient stability studies of power system with multi-microgrids. Microgrid is a small local power system contains different electrical components which connected into distribution network through the Point of Common Couple(PCC). In order to simplify the grid-connect model of microgrid in power system stability study, a data-driven equivalent modeling method for microgrid based on Long Short-Term Memory(LSTM) recurrent neural network is proposed in this paper. LSTM recurrent neural network is the state-of-the-art models for a variety machine learning problems, and the dynamic behaviors of microgrid under grid-connect mode are presented by the LSTM recurrent neural network. The training data set should contain the dynamic behaviors of all components, the current and power of PCC are collected as the training data set during the faults for the parameter estimation of LSTM. Based on the measurement data set, a LSTM recurrent neural network structure with four inputs and two outputs is designed. During the training process, the real and imaginary parts of the current at present and previous time are taken as the input of the network, and errors of the output active and reactive power between equivalent model and detailed model of microgrid is taken as the evaluation index of the equivalent model method. An AC microgrid contains different distributed generations and load is built in DIgSILENT, and the accuracy of the proposed method is verified by comparing the equivalent model with the original detailed system.
In this paper, a voltage regulation system based on indirect adaptive fuzzy (IAF) control for doubly salient electromagnetic generator (DSEG) is proposed to improve the robustness of the system and reduce output voltage ripple. The operating principle of IAF controller is described in detail subsequently and the stability condition of the system is deduced by Lyapunov function based on the mathematical model and working principle of the generator. Moreover, the selection method of parameters and control strategy are determined with the adaptive fuzzy control law. Finally, a field-circuit coupling simulation model of voltage regulation system for DSEG using IAF controller is constructed by finite element analysis technique and transient solver of control circuit. The simulation results show that DSEG using IAF controller has good static characteristics, high robustness, and low output voltage ripple.
Microgrids can significantly improve the utilization of distributed generation (DG) and the reliability of the power supply. However, in the grid-tied operational mode, the interaction between the microgrid and the distribution network cannot be ignored. The paper proposes an equivalent modeling method for the microgrid under grid-tied mode based on a characteristic model. It can simplify the microgrid model in the numerical simulation of the distribution network. The proposed equivalent model can present the dynamic response of a microgrid but not miss any of its primary characteristics. The characteristic model is represented by a low-order time-varying differential equation with the same characteristics of the original microgrid system. During the modeling process, the voltage and the power exchanged between the microgrid and distribution network are collected as the training data for the identification of model parameters. A recursive damped least squares algorithm (RDLS) is used for the parameter identification. A microgrid system containing different DGs is built to test the proposed modeling method in DIgSILENT, and the results show that the proposed dynamic equivalent modeling method is effective and the characteristic model can present the dynamic behaviors of the detailed model of a microgrid.
The construction of an electromagnetic coupling power transfer system is introduced in this paper. Considering the characteristics of the battery charger, a novel parameter design method based on the load of the maximum power transfer point is proposed. Then, the compensator, resonant circuits, and some key parameters of the electromagnetic coupler are discussed in detail by constructing a mutual inductance model to carry out impedance calculation and analysis. Coupling coefficient influenced by different magnetic circuits and coil distribution were analyzed by building a finite element model and an equivalent magnetic circuit. Moreover, impedance matching and compensation network parameters were theoretically calculated and simulated. Finally, a wireless power charger based on an open-loop class E amplifier with the maximum power point load consideration was manufactured. Simulation and experiments were done to verify the analyses, and the capability of 4.2 W power delivery at a distance of 10 mm and a peak system efficiency exceeding 72% were demonstrated.