This study examines residual low-order (linear and constant) phase errors in interferometric synthetic aperture radar (InSAR) when compact, high-frequency radar sensors are mounted on commercial uncrewed aerial vehicles (UAVs). Although higher carrier frequencies and shorter standoff ranges enable fine-resolution interferometry, the same characteristics—together with UAV platform instability—make the system highly vulnerable to motion-induced phase errors, which can significantly degrade or even invalidate DEM reconstruction. This paper first quantifies the admissible motion-error bounds for reliable multi-baseline phase-gradient estimation, and then introduces a post-autofocus correction scheme that estimates the residual linear term from the interferometric fringe frequency and refines it via an FFT-based correlation objective, while the constant term is calibrated using ground control points (GCPs). The method is validated through simulations of a 24 GHz UAV demonstrator. To the best of our knowledge, this work provides the first post-autofocus demonstration of linear-and-constant residual-error mitigation for UAV-based high-frequency multi-baseline InSAR. In the considered K-band setting, the proposed approach reduces the DEM error from 42 m to 0.2 m (≈98% improvement).