Serkan Budak

Dr. Serkan Budak

Electrical and Electronics Engineering, Konya Technical University, Konya, Turkey (Türkiye)
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2022 in Turkish Journal of Forecasting
Verified
Journal Article
Closed access
MÖMuhammed Nazmi Öz
Muhammed Nazmi Öz
SBSerkan Budak
Serkan Budak
EKEnder Kurnaz
Ender Kurnaz
Akif DurduAkif Durdu
Akif Durdu
The use of unmanned aerial vehicles (UAV) systems has increased in recent years. Therefore,studies on UAVs have increased today. In this direction, the production of UAV systems with domestic resources has gained importance. In this study, it is desired to develop a domestic and national flight control card and software. In the flight control board designed for the UAV, it is aimed to keep the vehicle in balance in the air. Accurate measurement of platform orientation plays an important role in many applications such as aerospace, robotics, navigation, marine, machine interaction [1]. Inertial Measurement Unit (IMU) sensor was used to accurately measure the orientation of the UAV. IMU sensor is widely used in UAVs due to its light weight and low energy consumption. In this direction, the need for a filter has emerged in the IMU sensor, which is used to accurately measure the orientation of the unmanned aerial vehicle. In this study, a complementary filter was applied on the IMU sensor. Thanks to this filter, it has been observed that the accuracy of the data received from the IMU sensor has increased. Based on the data obtained, a Proportional Integral Derivative (PID) algorithm was developed, and the vehicle was kept in balance. In this study, ARMCortex-M4 based STM32F407VG microcontroller and MPU6050 as IMU sensor were used. Keil-uVision5 compiler is preferred for software. As a result, high accuracy in the orientation detection of unmanned aerial vehicles was obtained by applying a complementary filter on the IMU sensor.

5 October 2020 in European Journal of Science and Technology
Verified
Journal Article
Open access
PDF file
SBSerkan Budak
Serkan Budak
BABahadir Akbal
Bahadir Akbal
Havai hatlar genellikle elektrik enerjisi iletimi için kullanılır. Ayrıca XLPE yeraltı kablo hatları genellikle şehir merkezinde ve kalabalık alanlarda elektrik güvenliğini sağlamak için kullanılır, bu nedenle iletim hatlarında havai hat ile birlikte yüksek gerilim yeraltı kablo hatları kullanılır ve bu hatlar karma hatları olarak adlandırılır. Mesafe koruma röleleri, iletim hatlarındaki akım ve gerilim büyüklüklerine göre empedans tabanlı ölçüm sonucu arıza yerini belirler. Ancak yüksek gerilim kablo hattının karakteristik empedansı havai hattan önemli ölçüde farklı olduğundan, birim uzunluk başına farklı karakteristik empedans nedeniyle karma iletim hatlarında arıza konumu doğru bir şekilde tespit edilemez. Bu nedenle karma iletim hatlarında mesafe koruma röleleri ile arıza bölümünün ve yerinin tespiti zordur. Bu çalışmada, 154 kV havai iletim hattı ve yer altı kablo hattı, mesafe koruma röleleri için karma iletim hattı olarak incelenmiştir. Karma iletim hattında faz-toprak arızaları oluşturulur ve havai hat bölümü ve yeraltı kablo bölümü PSCAD / EMTDC ™ kullanılarak simüle edilir. Kısa devre arıza görüntüleri, havai iletim hattı ve yer altı kablo iletim hattı arızaları için mesafe koruma rölesinde oluşturulur. Görüntüler, arızanın R-X empedans diyagramını içerir ve R-X empedans diyagramından elde edilen görüntüler görüntü işleme adımları uygulanmıştır. Regresyon metotları, arıza yerinin tahmini için kullanılır ve görüntü işlemenin sonuçları, regresyon metotlarının eğitim süreci için girdi parametreleri olarak kullanılır. Regresyon yöntemlerinin sonuçları, bu çalışmanın sonunda iletim hatlarında arıza yerinin tahmini için en uygun metotu seçmek için karşılaştırılmıştır. Havai iletim hat kısmı arıza yeri çalışmasında kullanılan metot ve performans kriterlerine bakıldığında, “RMSE 0.017652” değeri ile en doğru sonuç veren Doğrusal Regresyon (Güçlü Doğrusal) metotudur. Yeraltı kablo iletim hat kısmı arıza yeri çalışmasında kullanılan metot ve performans kriterlerine bakıldığında, “RMSE 0.0060709” değeri ile en doğru sonuçları veren Doğrusal Regresyon (Kademeli Doğrusal) metotudur. Arıza yeri tahminleri incelendiğinde yüksek tahmin değerleri elde edilmiştir.

18 February 2026 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SBSerkan Budak
Serkan Budak
CSCemil Sungur
Cemil Sungur
Akif DurduAkif Durdu
Akif Durdu
This study proposes a robust cascaded hybrid control architecture combining the Linear Quadratic Regulator (LQR) with Super-Twisting Sliding Mode Control (STSMC) to address the attitude stabilization problem of underactuated quadrotor UAVs. In this framework, the inner LQR loop ensures optimal stabilization, while the outer STSMC loops provide robust reference modification to compensate for uncertainties. To maximize the robustness of the proposed hybrid architecture, the parameters of the STSMC component were globally optimized using the Big Bang-Big Crunch (BB-BC) algorithm. The effectiveness of the proposed strategy is rigorously evaluated on the Quanser 3-DOF Hover system model against two distinct benchmarks: the classical LQR and the optimization-based Model Predictive Control (MPC). Comprehensive simulation scenarios were conducted, including stochastic wind disturbances, time varying thrust coefficients, sudden payload release, and critical motor failure. Additionally, a virtual 3D spatial analysis based on kinematic reconstruction was performed to validate the positional stability of the rotor tips. The comparative results demonstrate that while the MPC controller exhibits a faster transient response compared to the classical LQR, it suffers from significant performance degradation under model mismatches. In contrast, the proposed LQR-STSMC consistently outperforms both benchmarks, achieving error metrics (ISE, IAE, and ITAE) orders of magnitude lower than the competitors. The findings confirm that the hybrid scheme offers superior fault tolerance, faster stabilization, and precise tracking capabilities, making it a highly reliable alternative for safety critical flight operations in uncertain environments.

31 December 2020 in Konya Journal of Engineering Sciences
Verified
Journal Article
Closed access
PDF file
SBSerkan Budak
Serkan Budak
BABAHADIR AKBAL
BAHADIR AKBAL
Overhead lines are generally used for electrical energy transmission. Also, XLPE underground cable lines are generally used in the city center and the crowded areas to provide electrical safety, so high voltage underground cable lines are used together with overhead line in the transmission lines, and these lines are called as the mixed lines. The distance protection relays are used to determine the impedance based fault location according to the current and voltage magnitudes in the transmission lines. However, the fault location cannot be correctly detected in mixed transmission lines due to different characteristic impedance per unit length because the characteristic impedance of high voltage cable line is significantly different from overhead line. Thus, determinations of the fault section and location with the distance protection relays are difficult in the mixed transmission lines. In this study, 154 kV overhead transmission line and underground cable line are examined as the mixed transmission line for the distance protection relays. Phase to ground faults are created in the mixed transmission line. overhead line section and underground cable section are simulated by using PSCAD/ EMTDC ™. The short circuit fault images are generated in the distance protection relay for the overhead transmission line and underground cable transmission line faults. The images include the R-X impedance diagram of the fault, and the R-X impedance diagram have been detected by applying image processing steps. Artificial neural network (ANN) and the regression methods are used for prediction of the fault location, and the results of image processing are used as the input parameters for the training process of ANN and the regression methods. The results of ANN and regression methods are compared to select the most suitable method at the end of this study for forecasting of the fault location in transmission lines.

3 September 2020 in Konya Journal of Engineering Sciences
Verified
Journal Article
Closed access
PDF file
SBSerkan Budak
Serkan Budak
BABAHADIR AKBAL
BAHADIR AKBAL
Elektrik enerjisinin kesintisiz ve kaliteli bir şekilde iletilmesi için, üretim yapıldığı noktadan tüketimolan noktaya kadar kontrol edilmesi gerekmektedir. Dolayısıyla üretimden tüketime kadar her aşamadailetim ve dağıtım hatlarında koruma yapılması şarttır. Elektrik tesislerinde koruma rölelerinin temelgörevi, sistemde meydana gelen kısa devrelerde arızalı olan bölgenin mümkün olan en kısa sürede devredışı etmektir. Sistemin en önemli parçası olan enerji iletim hatları ve bu hatları koruyan mesafe korumarölelerine bu konuda çok önemli görevler düşmektedir. Hızlı ve verimli çalışmalar yapmak için doğrubir hata yeri tespit tekniği gereklidir. İletim hatlarında transformatör nötr nokta topraklaması bir güçsisteminin tek faz – toprak kısa devre arızası sırasında oluşan sıfır bileşen akımı mesafe koruma rölesininçalışmasını etkilemektedir. Topraklama sistemi ve koruma sistemleri arasındaki ilişki göz önünealındığında, uygun bir topraklama seçimi yapılmalıdır. İletim hatlarında farklı topraklama sistemlerindekısa devre arızalarının yerinin doğru bir şekilde belirlenebilmesi için yapay sinir ağı (YSA) kullanılmıştır.YSA’nın performansını test etmek için destek vektör makineleri (DVM) ile karşılaştırılmıştır. İletim hattımodeli PSCAD ™ / EMTDC ™ benzetim programında oluşturulup YSA için gerekli veriler eldeedilmiştir. Farklı topraklama sistemlerinde oluşturulan kısa devre arızalarındaki mesafe korumarölesinin R-X empedans diyagramının empedans değişiminin görüntüsü kayıt altına alınarak veri setlerioluşturulmuştur. Görüntülerde ilgili odak noktaları özellik çıkarım ve görüntü işleme tekniklerikullanılarak farklı YSA modellerine giriş olarak verilmiş ve en iyi arıza yeri tahmini veren YSA modeliseçilmiştir.

9 January 2026 in Physica Scripta
Verified
Journal Article
Open access
SBSerkan Budak
Serkan Budak
CSCemil Sungur
Cemil Sungur
Akif DurduAkif Durdu
Akif Durdu
This study presents a comparative analysis of different control methodologies on the linearized model of a single degree-of-freedom (1-DOF) helicopter system around its operating point. The control structures evaluated in this study include a Proportional-Integral-Derivative (PID) controller optimized via Particle Swarm Optimization (PSO), Model Predictive Control (MPC), and the Deep Deterministic Policy Gradient (DDPG) algorithm based on Deep Reinforcement Learning (DRL). The conducted simulations revealed that the DRL-based controller exhibited a superior performance compared to the other methods, even on the linearized model, both in terms of reducing the magnitude of the error and improving the system’s transient response performance. This approach demonstrates the capacity to produce a rapid response without compromising the system’s stability, concurrently achieving faster rise and settling times. Furthermore, by effectively suppressing the time-weighted error values, it provides an advantage in terms of both accuracy and control quality. These compelling results indicate the significant potential of learning-based control methods in the control of nonlinear systems, establishing DRL-based strategies as a reliable foundation for advanced control applications and a superior alternative to classical methods.