Heat exchangers are the most crucial device used in many processes & chemical industries, power plants, and critical areas in engineering applications like refrigeration and air conditioning systems. Passive enhancement strategies entail changing the shape of inserts in an existing device to allow heat to transfer from the surface to the fluid without additional power. The passive approach by the different investigations to enhance the heat transfer, reducing the shape and cost of the equipment yield promising results. The effect of Vortex Generators (VGs) on heat transfer enhancement in heat exchangers has been investigated by many investigators by varying geometrical parameters like shape, location, attack angle, aspect ratio, and Reynolds number (Re). In this review paper, significant results and trends of the investigations on Vortex Generators (VGs) have been discussed to further enhancements of heat transfer in the heat exchanger by using passive techniques.
The microchannel heat exchanger (MCHE) is considered the next-generation heat exchanger owing to its high-performance thermal management systems and fabrication processes. The MCHE is used in many cooling applications, such as x ray medical devices, high-power microelectronics, and high-heat flux devices. Comprehensive exploration of different nanofluids, their concentrations, and impacts on pressure drop and heat transfer within the context of MCHEs was the main focus of the current study. The experiments were conducted at Reynolds numbers ranging from 100 to 500 for laminar flow. Additionally, nanoparticles (np) such as Al2O3, CuO, and carbon nanotubes (CNT) were added to de-ionized water at weight percentages of 0.01, 0.03, and 0.05. The results indicated that heat transfer significantly increased at a particle concentration 0.05 by wt. % for all nanofluids (nf). Furthermore, at a particle of 0.05 by wt. %, the heat transfer of the CNT-based nf increased by 37%, whereas those of the Al2O3- and CuO-based nf increased by 24.01% and 6.23%, respectively. The nanofluid pressure drop (PD) increases with an increase in the Reynolds number owing to the increase in the viscosity of the liquid compared to de-ionized water (base fluid) and requires more pumping power.
This study investigated the effect of triangular perforations with flat conical inserts in a double-tube heat exchanger. Triangular perforations with flat cone-shaped inserts were placed inside the inner tube to enhance the heat transfer coefficient. The experiments were conducted for a number of flat conical strips (m) and pitch ratios (P = p/di) for flows varying from Re = 3000 to 9000 at a constant attack angle (α = 20°). The results showed that a triangular perforation with flat cone-shaped inserts remarkably increases the heat transfer factor, in contrast to flat conical inserts. The rise in the coefficient of heat was attributed to the creation of turbulence and disturbance of the boundary layer caused by perforated inserts. Furthermore, it was observed that the heat transfer coefficient increased with the Reynolds number, indicating that the effect of the inserts was more significant at higher fluid velocities. Correlations were developed to compare and analyze the results of the Nusselt number and friction factor. The developed correlation results are in good agreement with the experimental results. The findings obtained from this study can be implemented to enhance the performance and optimize the design parameters of industrial heat exchangers.
7 April 2022 in International Journal of Ambient Energy
The microchannel heat exchangers are used in various electrical and electronics components and the transportation industry is transitioning from traditional gasoline-powered vehicles to zero-emission electric vehicles. This paper attempts to provide a detailed study on the design of microchannel heat exchangers and nanofluids to enhance the heat transfer and pressure drop characteristics. The investigation of experimental and numerical methods used to analyze various design parameters serves as a guide to carry out the research and predict the performance of microchannel heat exchangers. A complete assessment of the work on improving heat transfer in microchannel heat exchangers utilizing conventional and nanofluids is also provided. Cutting-edge developments in nanofluids provide alternative fluids that are quickly established as coolants, but an increase in the concentration of nanoparticles in nanofluids will lead to pressure drop. The study revealed a 30-35% increase in heat transfer performance and a 10-12% pressure drop penalty.
This study uses CFD simulations and experimental methods to investigate the impact of channel geometry and nanofluid concentration on heat transfer performance in microchannel heat exchangers. Results show that increasing nanoparticle concentrations and mass flow rates enhance heat transfer in rectangular and circular channels. At a nanoparticle concentration of 0.05% and a Reynolds number of 500, circular channels demonstrated superior heat transfer performance compared to rectangular channels. Nusselt numbers increased by 18.16% for rectangular and 24.55% for circular channels on average. Pressure drops for both geometries also increased, with a 17.57% rise for rectangular and 16.74% for circular channels relative to the base fluid. Additionally, the pressure drop was 4.72% higher in rectangular channels than in circular ones. Lower Reynolds numbers significantly reduced friction factors, with the minimum friction observed at 0.01% nanofluid concentration. Circular channels exhibited lower friction than rectangular channels across different nanofluid concentrations. CFD and experimental results were in close agreement, particularly regarding pressure drop and temperature, confirming the accuracy of the analysis.
2 January 2025 in International Journal on Interactive Design and Manufacturing (IJIDeM)