The present study aims to provide a deeper understanding for the transient thermal stress distributions of an annular fin made of FGM. The material properties of annular fin are assumed to be graded along the fin radius as a power-law function while the Poisson’s ratio is taken to be constant for simplicity. The energy balance equation is solved on Laplace domain by using exponential like solution introduced by Keller and Keller and Gauss quadrature method. The transformation to time domain achieved by using Durbin fast Fourier transformation method. The temperature distribution and thermal stresses are presented in graphical form for FG annular fin that is pure ceramic in the base and pure metal on the tip.
Thermal stress distributions in an annular fin with rectangular profile made of functionally graded material (FGM) are considered. The material properties of annular fin are assumed to be graded along the fin radius as a power-law function while the Poisson’s ratio is taken to be constant. The governing equations are solved analytically for specific value of inhomogeneity parameter of thermal conductivity and all numerical values of inhomogeneity parameters of modulus of elasticity and linear thermal expansion coefficient. The effect of the inhomogeneity parameters on temperature distribution and thermal stresses are presented in graphical form. The formulation is validated with benchmark results in the literature. It is also shown that functionally graded annular fin is subject to lower stresses, although it has higher tip temperature than the homogeneous one.
Functionally graded materials (FGM) are advanced composite materials whose mechanical properties vary continuously from one surface to another at macro level. Thick walled annular structures are widely used in industry as nuclear reactors, long pipes used for carrying gases/oil, pressure vessels etc. Elastic analysis of FG thick-walled cylindrical and spherical pressure vessels subjected to internal pressure alone are studied. The material properties, Young' s modulus-Poisson' s ratio, are assumed to obey a graduation with the power-law function through the wall thickness. Under these assumptions, the governing equations of the vessels become a two-point boundary value problem. The analytical solution of such an equation cannot be obtained except for simple grading functions. Complementary Functions Method is performed to solve governing equation in order to obtain displacement and stress distributions depending on inhomogeneity parameters.
Thermal wave propagation and efficiency analysis of thin axially symmetric functionally graded annular fins with a fixed base boundary condition are examined. All material properties are graded along the radial direction using the Mori–Tanaka homogenization scheme to design a realistic and physically meaningful graded material model and create a smooth distribution of elastic and thermal material properties. The novelty of this research is handling a more realistic annular fin, which has sufficient strength in practice and significantly reduces weight, using two different metal materials with the elasticity-based Mori–Tanaka model. These conditions result in two-point linear boundary value problems that are numerically solved by the pseudospectral Chebyshev method. The temperature distributions, thermal stresses and the efficiency in the functionally graded annular fin are compared with fins made of steel only and aluminium only.