Porous magnetite (Fe3O4) and hematite (α-Fe2O3) nanoparticles were prepared via the sol-gel auto-combustion method. The gels were prepared by reacting ferric nitrates (as oxidants) with starch (as fuel) at an elevated temperature of 200 °C. Different ratios (Φ) of ferric nitrates to starch were used for the synthesis (Φ = fuel/oxidant). The synthesized iron oxides were characterized by Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, X-ray diffraction (XRD) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmet–Teller (BET) and vibrating sample magnetometer (VSM) analysis techniques. The crystal structure, morphology, and specific surface area of the iron oxide nanoparticles (Fe3O4 and α-Fe2O3) were found to be dependent on the starch content. The FT-IR, XRD and VSM analysis of the iron oxides for Φ = 0.3 and 0.7 confirmed the formation of the α-Fe2O3 core, whereas at Φ = 1, 1.7, and 2 showed that Fe3O4 cores were formed with the highest saturation magnetization of 60.36 emu/g at Φ = 1. The morphology of the Fe3O4 nanoparticles exhibited a quasi-spherical shape, while α-Fe2O3 nanoparticles appeared polygonal and formed clusters. The highest specific surface area was found to be 48 m2 g−1 for Φ = 1.7 owing to the rapid thermal decomposition process. Type II and type III isotherms indicated mesoporous structures.
The environmental pollution and the rapid depletion of fossil fuel caused by the rapid increase in industrial production became serious problems for humans. These issues have inspired many researchers to found eco-friendly materials, which can degrade pollutants and produce green energy. Titanium dioxide (TiO2) thin films are one of the important and promising semiconductor materials for environmental and energy applications because of their unique optical and electronic properties. In this chapter, an overview of the background of TiO2 structure and the different methods of synthesis TiO2 thin films were carried out. The photocatalytic water treatment and the water split for H2 production by TiO2 thin films were investigated. The strong influence on photocatalytic and water split efficiency of TiO2 thin films by crystal structure, surface area, crystalline structure, average particle size and porosity were summarized.