Enterococcus faecium No. 78 (PNCM-BIOTECH 10375) isolated from puto, a type of fermented rice in the Philippines was used to produce lactic acid in repeated batch fermentation mode. Enzymatically liquefied sago starch was used as the sole carbon source, since sago (Metroxylon spp) is a sustainable crop for industrial exploitation. Liquefied sago starch was inoculated with E. faecium to perform the saccharification and fermentation processes simultaneously. Results demonstrated that E. faecium was reused for 11 fermentation cycles with an average lactic acid yield of 36.3 ± 4.71 g/l. The lactic acid production was superior to that of simple batch mode and continuous fermentation in terms of lactic acid concentration. An un-dissociated lactic acid concentration of 1.15 mM affected the productivity of the cells. Work is in progress to maintain and increase the usability of the cells over higher fermentation cycles.
7 June 2019 in IOP Conference Series: Materials Science and Engineering
Lactic Acid bacterium (LAB) Enterococcus faecalis was used with the aim of scaling up a lactic acid fermentation (LAF) from 3L jar fermenter to pilot scale up to 100-L in an open fermentation. Batch mode in Lab and pilot scale fermentations were compared in terms of productivity, overall yield, cell growth, lactic acid production, and glucose consumption. Fermentations were performed at pH 6.86, 45 oC, and 100 rpm. Process simulation was conducted by using SuperPro Software and the data obtained from pilot scale. The results were compared using t-test and ANOVA. The results showed that the production rate of Lab scale was 4.96±0.09 g/Lh with a yield of 0.93 ±0.005. While for pilot scale, the production rate was 3.91 g/Lh with a yield of 0.915 ±0.005. There was no significant difference between both processes, regarding the yield, but there was a difference regarding the production rate, being slowly lower for pilot scale, but still high for industrial scaling up. Contamination was controlled fairly because Enterococcus faecalis is a thermophilic strain and then, proved to have industrial potential to produce Lactic Acid (LA).
30 April 2020 in Journal of Applied Science & Process Engineering
Tilapia (Oreochromis sp.) is a fish that is gaining ground in cultivation and sales because of its nutritional properties: high protein content, vitamins, and minerals with few unhealthy saturated fats as in red meats. This work aimed to evaluate the effect of cooking on the chemical composition, Aw, and pH, in addition to the electrophoretic, and fatty acid profile of the Tilapia using an electric oven, microwave and steaming as cooking methods. The results showed that the nutritional components of Tilapia changed significantly (p<0.05) at two temperatures and at two potencies used. Microwave and steaming preserved better the proteins in the Tilapia after its cooking. Electrophoresis results showed a decrease in intensity and number of bands depending on the type of treatment to which the meat was subjected. On the other hand, the electric oven method at 2 temperatures resulted with the highest increase in essential fatty acids (45% and 36%), with a slight decrease in the ω-6 family, because of a probable hydrolysis or oxidation of the same. The steam cooking showed a slight increase in essential fatty acids, but microwave oven preserved better the proteins, indicating that this could be a good method for cooking Tilapia.