A dual-band metasurface array is presented in this paper for electromagnetic (EM) energy harvesting in the Wi-Fi band and Ku band. The array consists of metasurface unit cells, rectifiers, and load resistors. The metasurface units within each column are interconnected to establish two channels of energy delivery, enabling the transmission and aggregation of incident power. At the terminals of two channels, a single series diode rectifier and a voltage doubler rectifier are integrated into them to rectify the energy in the Wi-Fi band and the Ku band, respectively. A 7 × 7 prototype of the metasurface array is fabricated and tested. The measured results in the anechoic chamber show that the RF-to-dc efficiencies of the prototype at 2.4 GHz and 12.6 GHz reach 64% and 55% accordingly, when the available incident power at the surface is 3 dBm and 14 dBm, respectively.

Cell separation has become @important in biological and medical applications. Dielectrophoresis (DEP) is widely used due to the advantages it offers, such as the lack of a requirement for biological markers and the fact that it involves no damage to cells or particles. This study aimed to report a novel approach combining 3D sidewall electrodes and contraction/expansion (CEA) structures to separate three kinds of particles with different sizes or dielectric properties continuously. The separation was achieved through the interaction between electrophoretic forces and inertia forces. The CEA channel was capable of sorting particles with different sizes due to inertial forces, and also enhanced the nonuniformity of the electric field. The 3D electrodes generated a non-uniform electric field at the same height as the channels, which increased the action range of the DEP force. Finite element simulations using the commercial software, COMSOL Multiphysics 5.4, were performed to determine the flow field distributions, electric field distributions, and particle trajectories. The separation experiments were assessed by separating 4 µm polystyrene (PS) particles from 20 µm PS particles at different flow rates by experiencing positive and negative DEP. Subsequently, the sorting performances of the 4 µm PS particles, 20 µm PS particles, and 4 µm silica particles with different solution conductivities were observed. Both the numerical simulations and the practical particle separation displayed high separating efficiency (separation of 4 µm PS particles, 94.2%; separation of 20 µm PS particles, 92.1%; separation of 4 µm Silica particles, 95.3%). The proposed approach is expected to open a new approach to cell sorting and separating.

This paper introduces a novel temperature-controlled terahertz metamaterial demultiplexer that capitalizes on the phase transition characteristics of vanadium dioxide (VO₂). The proposed demultiplexer is structured in three distinct layers: the top layer serves as a reflective layer, comprising a double-open resonance ring and a factory rectangular metal sheet; the middle layer is a polyimide dielectric isolation layer; and the bottom layer is a cross-shaped VO₂ temperature-controlled layer. This design enables the effective separation of four distinct terahertz frequency bands: 0.72 THz, 1.11 THz, 0.98 THz, and 1.26 THz. Notably, the demultiplexer achieves high isolation levels exceeding −20 dB across all target frequencies, while maintaining an insertion loss of less than 1 dB. The device also exhibits extremely low insertion loss and high isolation properties, which are crucial for terahertz communication applications. Therefore, the presented design holds significant potential for application and development in the realm of terahertz communication technology, offering a viable solution for frequency separation in upcoming high-speed and broadband communication systems.

Metamaterial absorbers are candidates for stealth systems due to their excellent wave modulation capabilities. With the rapid development of radar detection technology, the switching ability of metamaterial absorbers is becoming more demanding. A broadband multifunctional switchable absorber/reflector based on active frequency selective surfaces (AFSS) is presented in this paper. The proposed structure comprises an absorbing layer, a switching layer, and a ground with air spacers sandwiched between each layer. The PIN diodes can realize significant broadband conditioning performance between absorption and reflection functions by switching four operating states: ‘00’, ‘01’, ‘10’, and ‘11’. The bias network of this structure features horizontal and vertical configurations that independently coordinate the two polarization directions. It is worth noting that the bias network of the designed structure is very simple to minimize the impact on the structure. Distributions of surface current, an equivalent circuit model, and structural parameters are analyzed for a better professional insight into the working mechanism of the absorber/reflector. Finally, a prototype is fabricated and measured to verify the simulation.