Wind turbine gearbox fault diagnosis is critical to guarantee working efficiency and operational safety. However, the current diagnostic methods face enormous restrictions in handling nonlinear noise signals and intricate compound fault patterns. Herein, a compound fault diagnosis method based on modified signal quality coefficient (MSQC) and versatile residual shrinkage network (VRSN) is proposed to resolve these issues. In detail, the MSQC is designed to remove the noise components irrelevant to wind turbine operation status, and it has the ability to balance the denoised effect and signal fidelity. The VRSN is constructed for compound fault diagnosis, and it consists of two heterogeneous residual shrinkage networks. The former is designed to count the number of faults, and the latter is adopted to identify the single or compound fault pattern. Finally, a self-built wind turbine gearbox compound fault test rig is adopted to verify the proposed method’s effectiveness. The results demonstrate that the proposed method is competitive in terms of compound fault diagnosis accuracy.
Significant wave height (SWH) is a key descriptor of sea state, yet providing accurate, site-specific forecasts at low computational cost remains challenging. This study proposes a transfer-learning-based framework for SWH forecasting that combines Seasonal and Trend decomposition using Loess (STL), a stacked long short-term memory (LSTM) network, and an efficient sliding-window updating scheme. First, STL is applied to decompose the SWH time series into trend, seasonal, and remainder components; the resulting sub-series are then fed into a transfer-learning architecture in which the parameters of the stacked LSTM backbone are kept fixed, and only a fully connected output layer is updated in each window. Using multi-year observations from five National Data Buoy Center (NDBC) buoys, the proposed STL-LSTM-T model is compared with a STL-LSTM configuration that is fully retrained after each STL decomposition. For example, the transfer-learning setup reduces MAE, MSE, and RMSE by up to 11.2%, 19.2%, and 14.5% at buoy 46244, respectively, while reducing the average training time per update to about one-fifth of the baseline. Parameter analyses indicate that a two-layer LSTM backbone and moderate continuous forecast step (6–12 steps) provide a good balance between predictive accuracy, error accumulation, and computational cost, making STL-LSTM-T suitable for SWH forecasting on resource-constrained platforms.
Fault diagnosis is vital for improving the reliability and safety of mechanical equipment. Existing fault diagnosis methods require a large number of samples for model training. However, in real-world environments, mechanical equipment usually operates under healthy conditions during most of its service life, resulting in a scarcity of fault samples. To solve this problem, a novel multilayer fusion correntropy representation method combined with a support vector machine is proposed for the fault diagnosis of mechanical equipment. First, the monitoring signal is expanded into multilayer signal components using wavelet packet decomposition. Then, the correlation between the signal components of each layer is expressed by correntropy, and the corresponding correntropy matrix is constructed. After performing the matrix logarithm operator, all correntropy matrices composed of correntropy values are fused into a vector, which is viewed as a feature of the signal. Finally, a support vector machine is established using small samples to realize fault classification. The effectiveness of the proposed method is validated on four public datasets. The results indicate that compared with other methods, the proposed method has advantages in terms of diagnosis accuracy and noise immunity ability.
Ice load is a crucial factor when designing structures for polar vessels. Due to the unpredictable nature of sea ice mechanics and the complexity of ship structures, obtaining ice load characteristics through full-scale measurements is considered more effective and reliable. However, conducting full-scale tests in the Arctic for China can be time-consuming and expensive. Using the natural ice fields in the Bohai Sea for full-scale tests can provide valuable insights into the study of ice load. To study ice load characteristics, full-scale measurements were carried out during icebreaker navigation trials in the ice zone of Bohai Sea. Distributed shear strain sensors were installed to measure the ice-induced structural strain on the starboard of the bow, and the local ice loads were determined based on the influence coefficient matrix method. Additionally, video cameras were utilized to record ice conditions, including ice type and thickness. By analyzing the data, the Rayleigh separation method was used to extract the process of ice load action. Statistical analysis was performed on the peak ice load values, with a particular emphasis on the various types of sea ice, ice thickness, and ship speed. The results show that the action period, peak value, mean value, and waveform of ice loads obtained in the full-scale measurement are consistent with the full-scale data of other icebreakers. The conclusion supports the effectiveness and feasibility of conducting ship ice load characteristic testing in the Bohai Sea.
Traditional MBSE faces challenges in verifying the dynamic performance of autonomous systems due to a semantic gap between static architecture and executable algorithms. To address this limitation, this study proposes a system-of-systems (SoS) modeling methodology that connects the Unified Architecture Framework (UAF) with multi-agent reinforcement learning. A Drivers–Challenges–Opportunities–Goals (DCOG) framework maps strategic intent to operational capabilities, which are formalized in the UAF. Driven by the UAF Domain Metamodel (DMM), a pipeline transforms behavioral and resource specifications into a Markov Decision Process (MDP). An Automatic Curriculum Learning Multi-Agent Proximal Policy Optimization (AutoCL-MAPPO) algorithm then resolves the MDP. The autonomous fleet achieves a 73% mission success rate, outperforming the standard MAPPO baseline (65%). These performance metrics are averaged over 1000 independent test episodes to ensure statistical significance, with baseline algorithms evaluated under identical environmental conditions. Using Systems Modeling Language (SysML) as a verification carrier, activity simulations confirm that the generated decision sequences conform to UAF structural logic. Metric constraint deviation analysis provides empirical feedback for iterative design refinement. This methodology establishes a verifiable digital thread, closing the loop between architecture modeling and learned behavior for autonomous SoS and Human–AI Teaming.