Young’s modulus for heterophase composite silicon carbide ceramics with different phase ratios has been determined by two independent techniques. The applicability of the Voigt–Reuss–Hill model has been tested to the calculation of the effective Young’s modulus by the measured properties of ceramic components. It is established that the calculated data and results of independent measurements by dynamic indentation are close. It is shown that the advantage of the calculation method is a narrower range of the obtained values of Young’s modulus. At the same time, its application requires additional measurements of ceramic composition and mechanical properties of the components.
1 July 2004 in Combustion, Explosion, and Shock Waves
The internal and external surfaces of a percolation cluster, as well as the total surface of the entire percolation system, are investigated numerically and analytically. Numerical simulation is carried out using the Monte Carlo method for problems of percolation over lattice sites and bonds on square and simple cubic lattices. Analytic expressions derived by using the probabilistic approach describe the behavior of such surfaces to a high degree of accuracy. It is shown that both the external and total surface areas of a percolation cluster, as well as the total area of the surface of the entire percolation system, have a peak for a certain (different in the general case) fraction of occupied sites (in the site problem) or bonds (in the bond problem). Two examples of technological processes (current generation in a fuel cell and self-propagating high-temperature synthesis in heterogeneous condensed systems) in which the surface of a percolation cluster plays a significant role are discussed.