A novel C/SiO2 composite with a carbon–silica–carbon (C-mcms) three layer structure was synthesized and evaluated as an anode material for high-energy lithium ion batteries. The C-mcms exhibits an excellent capacity of about 1055 mA h g−1 at a current density of 500 mA g−1 after 150 cycles without detectable decay, and high-rate capability.
Based on the issues of polyolefin separators, the application of natural minerals with unique properties to lithium-ion battery separators has attracted widespread attention.
Natural flaky graphite in Shandong, China was purified by H2O2, a new patent method to produce graphite without sulfur and used as precursor to prepare exfoliated graphite through microwave irradiated expansion with some chemicals (such as hydrogen peroxide, nitric acid, and acetic acid). With the centrifugation process, graphene was synthesized by using an efficient and simple method under ultrasonic and microwave irradiation at the room temperature. Natural graphite and exfoliated graphite were characterized by X-ray diffraction and scanning electronic microscopy, and the resultant graphene was investigated and confirmed by atomic force microscopy, Raman micro-spectrometer, etc. Natural graphite in Shandong, China, consisted of mainly hexagonal (2H) and a little rhombohedral structure (3R), was beneficial for the synthesis of graphene. Graphene-like nanosheets about 1 to 3 nm, around three to five carbon layers can be synthesized efficiently by microwave and ultrasonic irradiation with natural graphite.
In this study, polypropylene/halloysite nanotube (PP/HNT) composite separators were prepared by coating HNTs treated with hydrochloric acid (HCl) of different concentrations on both sides of a PP separator. The effect of HNTs treated with hydrochloric acid (HCl) of different concentrations on the properties of PP/HNT composite separators was investigated. The results indicate that the PP/HNT composite separator exhibits higher electrolyte uptake and wettability than a commercial PP separator, resulting in a better electrochemical performance in Li/LiFePO4 cells. In particular, the PP/HNTs-1.2 M composite separator with HNTs treated with 1.2 M HCl exhibits the highest electrolyte uptake (384%) and ionic conductivity (1.03 mS cm−1). The cells assembled with a PP/HNTs-1.2 M composite separator deliver discharge capacities of 166 mA h g−1 (0.5 C) and 131 mA h g−1 (3 C) with attractive cycling performance (87.6% capacity retention after 100 cycles). HNTs treated with HCl of appropriate concentrations can significantly improve the properties of PP/HNT composite separators for application in lithium-ion batteries.