Experiments were conducted to investigate the process of aluminum and lithium extraction from high-alumina coal fly ash (HCFA) generated from coal-fired power plants located in northern China. The presence of mullite and other aluminosilicates lead to low reactivity of coal fly ash. An activation pretreatment that destroys an inert composition of coal is necessary. The activation roasting of coal fly ash using sodium chloride and a subsequent leaching process were performed in this research. The results showed that almost no aluminum and lithium were dissolved under direct water leaching, while about 7% and 10% of those were leached into the acid solution respectively. Adding NaCl enhanced the atmospheric pressure leaching of aluminum and lithium with a leaching rate around 50%. Phase analysis and equilibrium calculations results showed that the roasting reaction between the HCFA and NaCl occurred, which led to generation of main new phase NaAlSi₃O₈. The pressure extraction efficiencies of aluminum and lithium were increased to about 93% and 98%, respectively. The implications of the findings provide an alternative process for recovering aluminum and lithium from readily available high-alumina coal fly ash.

The interaction between small organic molecules and coal macerals plays a critical role in regulating fluid retention and transport in coal-related energy and environmental systems. However, the microscopic mechanisms governing adsorption selectivity and interfacial dynamics on different maceral surfaces remain insufficiently understood. In this study, molecular dynamics simulations were employed to investigate the adsorption and desorption behaviors of toluene (TOL) and tetrahydrofuran-2-ol (FUR) on inertinite (INE) and vitrinite (VIT) surfaces at the molecular level. Time-dependent variations in adsorption number, residence time, molecular mobility, interaction energies, and hydrogen-bond characteristics were systematically analyzed. The results reveal strong maceral- and molecule-dependent adsorption preferences. TOL exhibits the most stable adsorption on the INE surface, characterized by rapid surface accumulation, minimal desorption, and a long residence time of 0.43547 ns, which is mainly driven by strong van der Waals interactions and aromatic stacking effects. In contrast, TOL adsorption on VIT is highly dynamic, with frequent desorption events and a markedly reduced residence time of 0.1077 ns. FUR shows relatively weaker and more reversible adsorption on INE, accompanied by enhanced molecular mobility and a shorter residence time of 0.31354 ns. Notably, FUR demonstrates stronger surface retention on VIT, with an extended residence time of 0.34439 ns, which can be attributed to increased electrostatic contributions and intermittent hydrogen bonding. Hydrogen-bond analysis indicates that FUR forms longer-lived hydrogen bonds with VIT (22.05 ps) than with INE (17.86 ps), providing additional stabilization at the interface. These findings elucidate the distinct adsorption mechanisms of aromatic and polar molecules on heterogeneous coal macerals and offer molecular-scale insights into organic matter–coal interfacial processes relevant to energy extraction and subsurface transport.

Coalbed methane development is constrained by reservoir characteristics including high gas adsorption, high salinity, and high closure pressure, which impose significant limitations on conventional polymer fracturing fluids regarding viscosity enhancement, proppant transport, and fracture maintenance. In this study, a novel polymer fracturing fluid system, Z-H-PAM, was designed and synthesized to achieve strong salt tolerance, low adsorption affinity, and high elasticity to withstand closure pressure. This was accomplished through the molecular integration of a zwitterionic monomer ZM-1 and a hydrophobic associative monomer HM-2, forming a unified structure that combines rigid hydrated segments with a hydrophobic elastic network. The results indicate that ZM-1 provides a stable hydration layer and low adsorption tendency under high-salinity conditions, while HM-2 contributes to a high-storage-modulus, three-dimensional physically cross-linked network via reversible hydrophobic association. Their synergistic interaction enables Z-H-PAM to retain viscoelasticity that is significantly superior to conventional HPAM and to achieve rapid structural recovery in high-mineralization environments. Systematic evaluation shows that this system achieves a static sand-suspension rate exceeding 95% in simulated flowback fluid, produces broken gel residues below 90 mg/L, and results in a core damage rate of only 10.5%. Moreover, it maintains 88.8% of its fracture conductivity under 30 MPa closure pressure. Notably, Z-H-PAM can be prepared directly using high-salinity flowback water, maintaining high elasticity and sand-carrying capacity while enabling fluid recycling and reducing reservoir damage. This work clarifies the multi-scale mechanisms of strongly hydrated and highly elastic polymers in coalbed methane reservoirs, offering a theoretical and technical pathway for developing efficient and low-damage fracturing materials.