The importance of the low-temperature selective catalytic reduction (LT-SCR) of NO_x by NH₃ is increasing due to the recent severe pollution regulations being imposed around the world. Supported and mixed transition metal oxides have been widely investigated for LT-SCR technology. However, these catalytic materials have some drawbacks, especially in terms of catalyst poisoning by H₂O or/and SO₂. Hence, the development of catalysts for the LT-SCR process is still under active investigation throughout seeking better performance. Extensive research efforts have been made to develop new advanced materials for this technology. This article critically reviews the recent research progress on supported transition and mixed transition metal oxide catalysts for the LT-SCR reaction. The review covered the description of the influence of operating conditions and promoters on the LT-SCR performance. The reaction mechanism, reaction intermediates, and active sites are also discussed in detail using isotopic labelling and in situ FT-IR studies.

The primary objective of this review was to illustrate the significance of ceria–zirconia (CZ) mixed oxides as catalysts and catalyst supports as employed for a wide variety of catalytic applications both in the liquid and gaseous phases. In particular, we were interested in bringing together the recent literature pertaining to these mixed oxides with catalysis perspective. The most prominent application of CZ mixed oxides is in three-way catalysis (TWC) as oxygen storage and release material for several years by replacing cerium dioxide as it shows better efficiency and a high thermal stability. Doping with zirconium oxide, as it is alone a non-reducible oxide, makes the CZ mixed oxide a highly reactive, thermally stable, and more reducible with elevated oxygen storage capacity (OSC) that are important for TWC applications. Apart from the TWC use, the CZ mixed oxides have a huge number of applications, as a direct component or a support, ranging from water–gas shift reaction, reforming of hydrocarbons, dehydration of alcohols, CO₂ utilization, catalytic combustion of pollutants, fine chemicals production, photocatalysis, and so on. All these applications are mainly dependent on three parameters of the mixed oxides, namely, OSC or redox nature, acid–base properties, and crystalline phases. Besides, most of the applications are influenced by the physical properties such as specific surface area, pore volume, pore diameter, crystallite size, and so on. In this review, many details pertaining to the synthesis of these mixed oxides by various conventional and non-conventional methods, their characterization by several techniques, and their application for various reactions of energy and environmental significance, as reported in the literature, are assessed.

Ce_0.80Pr_0.12Sn_0.08O_2−δ combination catalyst exhibited highest CO oxidation activity owing to its high specific surface area, better reducibility, superior surface active oxygen species, and oxygen vacancies among various samples investigated.