Yijian Huang

Dr. Yijian Huang

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 January 2019 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
YHYijian Huang
Yijian Huang
Yiping WangYiping Wang
Yiping Wang
LZLongfei Zhang
Longfei Zhang
YSYu Shao
Yu Shao
FZFeng Zhang
Feng Zhang
Yiping WangYiping Wang
Yiping Wang
A liquid-crystal-filled photonic crystal fiber (PCF) is proposed for electro-optical modulation. The E7 liquid crystal is precisely filled in one of the innermost air holes of the PCF and forms an in-fiber optical coupler, and the resonance wavelength can be tuned with a sensitivity of 5.594 nm/Vrms when an external voltage is applied. The device can operate as an electro-optical switch/modulator and exhibits response and recovery times of approximately 47 and 24 ms, respectively from 1414 nm to more than 1700 nm. The proposed structure is expected to have potential applications in electric field sensing and wavelength-tunable electro-optical devices.

25 June 2018 in Sensors
Verified
Journal Article
Open access
PDF file
YSYu Shao
Yu Shao
Yiping WangYiping Wang
Yiping Wang
SCShaoqing Cao
Shaoqing Cao
YHYijian Huang
Yijian Huang
LZLongfei Zhang
Longfei Zhang
Yiping WangYiping Wang
Yiping Wang
A surface plasmon resonance (SPR) sensor based on a side-polished single mode fiber coated with polyvinyl alcohol (PVA) is demonstrated for relative humidity (RH) sensing. The SPR sensor exhibits a resonant dip in the transmission spectrum in ambient air after PVA film coating, and the resonant wavelength shifts to longer wavelengths as the thickness of the PVA film increases. When RH changes, the resonant dip of the sensor with different film-thicknesses exhibits interesting characteristics for optical spectrum evolution. For sensors with initial wavelengths between 550 nm and 750 nm, the resonant dip shifts to longer wavelengths with increasing RH. The averaged sensitivity increases firstly and then drops, and shows a maximal sensitivity of 1.01 nm/RH%. Once the initial wavelength of the SPR sensor exceeds 850 nm, an inflection point of the resonant wavelength shift can be observed with RH increasing, and the resonant dip shifts to shorter wavelengths for RH values exceeding this point, and sensitivity as high as −4.97 nm/RH% can be obtained in the experiment. The sensor is expected to have potential applications in highly sensitive and cost effective humidity sensing.

25 February 2022 in Biosensors
Verified
Journal Article
Open access
PDF file
YHYijian Huang
Yijian Huang
Yiping WangYiping Wang
Yiping Wang
GXGaixia Xu
Gaixia Xu
XRXing Rao
Xing Rao
JZJiaxiong Zhang
Jiaxiong Zhang
Yiping WangYiping Wang
Yiping Wang
A compact surface plasmon resonance sensor based on an H-shaped optical fiber is proposed and demonstrated. The H-shaped optical fiber was fabricated experimentally by using hydrofluoric acid to controllably corrode the polarization-maintaining fiber. A satisfactory distance between the outer surface of the fiber and the core can be achieved, and then the surface plasmon resonance effect can be excited by coating a metal film of appropriate thickness on the surface of the fiber. This technology can realize the preparation of multiple samples at one time, compared to the traditional side-polishing technique. The H-shaped optical fiber obtained from corrosion exhibits a high surface quality and short lengths, down to only a few hundred microns. The effects of the proposed H-shaped optical fiber on spectral properties are induced by process parameters, including fiber remaining thickness, coating thickness and fiber length, and were investigated in detail. The prepared sensor was used for the specific detection of human IgG, and the minimum human IgG concentration that the sensor can distinguish is 3.4 μg/mL. Such a compact surface plasmon resonance fiber sensor has the advantages of an easy fabrication, good consistency and low cost, and is expected to be applied in the specific detection of biomarkers.

4 August 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
HWHan Wu
Han Wu
Yiping WangYiping Wang
Yiping Wang
LZLichao Zhang
Lichao Zhang
KGKuikui Guo
Kuikui Guo
YHYijian Huang
Yijian Huang
Yiping WangYiping Wang
Yiping Wang
We propose a simple deep ultraviolet (UV) sensor consisting of a conventional single-mode optical fiber capped with a ZnO microwire. The ZnO microwire positioned on the fiber-tip acts as a Fabry-Pérot interferometer, of which the reflection spectrum can be employed for UV light monitoring. When ZnO microwire is exposed to UV irradiation, variations in the concentration of photogenerated carriers will result in the change of the refractive index (RI) of the ZnO microwire, and thus interference wavelengths of the proposed device exhibits red-shift with a sensitivity of 0.288 nm/(W·cm -2 ) under 266-nm deep UV laser irradiation. Meanwhile, a fast response time of 0.56 ms is experimentally obtained. The results may pave a new way for fast responsive, highly spatial-resolved optical fiber UV sensors.

9 March 2020 in Sensors
Verified
Journal Article
Open access
PDF file
FZFeng Zhang
Feng Zhang
Yiping WangYiping Wang
Yiping Wang
ZBZhiyong Bai
Zhiyong Bai
SLShen Liu
Shen Liu
CFCailing Fu
Cailing Fu
Yiping WangYiping Wang
Yiping Wang
A highly sensitive torsion sensor can be constructed by combining a twisted photonic crystal fiber with a liquid-filled waveguide in its air-hole cladding. The torsion sensitivity of this type of sensor is determined directly by the phase-matching conditions between the fiber core mode and the liquid waveguide mode, which can be improved by tuning the helicity (denoted by the initial twist rate, α0) of the twisted photonic crystal fiber. The enhancement mechanism of α0 on the sensitivity of the proposed torsion sensor is investigated theoretically, followed by experimental verifications, and a torsion sensitivity as high as 446 nm∙mm∙rad−1 can be obtained by tailoring these parameters. Experimental results show that the torsion sensitivity increases with α0 decreasing from 3.142 to 3.925 rad/mm, which are in consistence with that of the numerical predictions. The demonstrated torsion sensor is expected to contribute to the development of highly sensitive torsion-related photonic crystal fiber devices.

10 November 2019 in Micromachines
Verified
Journal Article
Open access
PDF file
YHYijian Huang
Yijian Huang
Yiping WangYiping Wang
Yiping Wang
CMChun Mao
Chun Mao
JWJingru Wang
Jingru Wang
HWHan Wu
Han Wu
Yiping WangYiping Wang
Yiping Wang
We propose a highly sensitive sensor based on a nematic liquid-crystal-filled side-hole fiber. The liquid crystal is precisely filled into an air hole of the optical fiber using a method of manually gluing in the fusion splicer. Due to the coupling between the liquid crystal waveguide and the fiber core, multiple response dips appear in the transmission spectrum of the device. When an external temperature or electric field variation is applied to the liquid crystal and its refractive index changes, the transmission spectrum of this device will shift accordingly. Temperature and electric field response tests were performed on the device in the experiment, and the obtained temperature and electric field sensitivities were as high as −1.5 nm/°C and 3.88 nm/Vpp, respectively. For the exhibited advantages of being easy to manufacture, low cost, and high sensitivity, the proposed sensor is very promising for actual application in temperature or weak electric field monitoring.