Using the conventional fracture parameters is difficult to characterize and predict the complex natural fractures in the tight conglomerate reservoirs. In order to quantify the fracture behaviors, a fractal method was presented in this work. Firstly, the characteristics of fractures were depicted, then the fracture fractal dimensions were calculated using the box-counting method, and finally the geological significance of the fractal method was discussed. Three types of fractures were identified, including intra-gravel fractures, gravel edge fractures and trans-gravel fractures. The calculations show that the fracture fractal dimensions distribute between 1.20 and 1.50 with correlation coefficients being above 0.98. The fracture fractal dimension has exponential correlation with the fracture areal density, porosity and permeability and can therefore be used to quantify the fracture intensity. The apertures of micro-fractures are distributed between 10 μm and 100 μm, while the apertures of macro-fractures are distributed between 50 μm and 200 μm. The areal densities of fractures are distributed between 20.0 m·m⁻² and 50.0 m·m⁻², with an average of 31.42 m·m⁻². The cumulative frequency distribution of both fracture apertures and areal densities follow power law distribution. The fracture parameters at different scales can be predicted by extrapolating these power law distributions.

The ocean is a significant global reservoir of uranium (U) and thorium (Th). These elements can be incorporated into marine sediments through processes involving organic matter (OM), redox conditions, terrigenous inputs, and mineral interactions. Helium generated through the radioactive decay of U and Th within geological formations represents a critical potential resource. Marine black shales, which are rich in U and Th, are widespread in the Ediacaran Doushantuo Formation of the Upper Yangtze Platform, making them a key target for helium exploration. However, there is limited research on the mechanisms behind U and Th accumulation in these shales. This study focuses on shales from the Doushantuo Formation in Chongqing, China, aiming to explore the mechanisms of U and Th accumulation and assess the potential for helium generation, and argillaceous dolomites are included for comparative analysis. The results show that the average U and Th content in the black shales (17.58 and 9.78 ppm, respectively) is higher than that of argillaceous dolomites (3.52 and 2.75 ppm, respectively). Uranium mainly comes from authigenic precipitation and hydrothermal inputs, while thorium is primarily sourced from terrigenous and hydrothermal inputs. The semi-humid climate in the provenance area facilitated parent rock weathering, with atmospheric precipitation and river systems transporting U and Th to the ocean. However, excessive terrigenous input can dilute the U and Th content in the sediments. In the shales, uranium is primarily adsorbed and/or complexed by organic matter (OM), with the anoxic–euxinic sedimentary environment and high OM content (TOC = 0.06–34.58 wt.%, r = 0.95) promoting U accumulation. Thorium accumulation is largely controlled by adsorption onto clay minerals. The total amount of helium generated from the Doushantuo shales is estimated to be 7.20 × 10¹⁰ m³.