Selectivity, permselectivity, and conductivity are the main ion-exchange membrane parameters. While permselectivity determines how well the membrane separates cations from anions, the selectivity determines how well the membrane transports uni- and multivalent ions. On the other hand, conductivity determines how fast the ions are transported through the membrane. All these parameters depend on many other factors, especially on the membrane structure. It is difficult to develop highly selective (permselective) and highly conductive heterogeneous ion-exchange membranes. Reason for this is porosity: while the conductivity increases with increasing porosity, the selectivity and permselectivity decreases. This work was focused on increasing the selectivity and, at the same time, the conductivity of heterogeneous ion-exchange membranes. It was found that most of the techniques of modification of homogeneous membranes cannot be used with modification heterogeneous ion-exchange membranes. It appears that the choice of a polymer matrix is a key factor in the preparation of heterogeneous ion-exchange membranes with high selectivity to monovalent ions and also high permselectivity while maintaining the same, even a higher conductivity.
4 September 2009 in Journal of Applied Electrochemistry
This case study deals with relationships between characteristic properties of organic ionexchange resins and heterogeneous ion-exchange membranes. At first chemical and temperature stability, humidity and particle size distribution of different types of ion-exchange resins was analyzed. Subsequently, membranes were prepared by using different filler/polymer matrix ratio or by using milled resins with different particle size distribution. Finally, different ion-exchange resins were used for preparing of heterogeneous ion-exchange membranes at fixed filler/polymer matrix ratio. We analyzed many characteristic properties of raw materials, intermediate and final products and we paid attention to process parameters during preparing of membranes too. It was proved that there are important relationships between properties of a membrane and the type of resin used for its preparation and the process of membrane preparation. The results show that most of ion-exchange resins can be used for ion-exchange membranes pr...