In this paper, a three-layered cement-based wave-absorbing board is designed and prepared by mixing wave-absorbing fillers such as nano-Si3N4, multi-layer nano graphene platelets (NGPs), nano-Ni, carbon fiber (CF) and carbon black (CB) into cement slurry. The effect of the amount of wave-absorbing fillers on the mechanical properties, resistivity and wave-absorbing reflectivity of cement slurry is studies. The microstructure of NGPs, nano-Si3N4 and the wave-absorbing board are characterized by TEM and SEM. Research shows that low content of NGPs and other wave-absorbing fillers can significantly reduce the resistivity of cement slurry and improve its mechanical strength, and dense massive crystals are precipitated in the cement hydration products. The reflectivity test reveals that in the frequency range of 2~18 GHz, the minimum reflectivity of the three-layered cement-based wave absorbing board reaches −18.8 dB, and the maximum bandwidth less than −10 dB reaches 15.3 GHz. This study can serve as reference for the preparation of new three-layered cement-based wave absorbing boards.
In this article, reduced graphene oxide/Ni/multi-walled carbon nanotubes/Fe3O4 filled paste is synthesized with the aim of developing a novel shielding material. To do so, nano-dispersion presenting homogeneous distribution is made by ultrasonic dispersing technology. Next, the effects of nano-absorbent content on the fluidity, mechanical strength, pore structure, resistivity, and absorbing reflectivity of paste are studied. At the end, the microstructure of composite is uncovered by scanning electron microscopy, Fourier transformer infrared, X-ray diffraction images as well as the pore size distribution and absorbing reflectivity are revealed. The results indicate that a small load of reduced graphene oxide and other nano-absorbents can significantly reduce the fluidity and resistivity of paste, but its pore structure is improved so that its mechanical properties are increased. Scanning electron microscopy images indicate that reduced graphene oxide promotes the increasing and thickening of the cement hydration products as well as the growth of a large number of flower-like and compact bulk crystals. Furthermore, the minimum reflectivity of −10.6 dB is obtained in the range of 2–18 GHz while the effective bandwidth of 16 GHz is obtained when reflectivity is less than −5 dB. This research provides a new pathway for the preparation of monolayer cement–based absorber.