The share of non-exhaust particles, including tire wear particles (TWP), within the airborne dust and particularly within PM10 has increased in recent years due to a significant reduction of other particles including exhaust road traffic emissions. However, the quantification of TWP is a demanding task due to the non-specificity of tracers, and the fact that they are commonly contained in analytically challenging low concentrations (e.g. Zn, styrene, 1,3-butadiene, vinylcyclohexene). This difficulty is amplified by the chemical and morpho-textural heterogeneity of TWP resulting from the interaction between the tires and the road surface. In contrast to bulk techniques, automated single particle SEM/EDX analysis can benefit from the ubiquitous heterogeneity of environmental TWP as a diagnostic criterion for their identification and quantification. For this purpose, we follow a machine-learning (ML) approach that makes use of an extensive number (67) of morphological, textural (backscatter-signal based) and chemical descriptors to differentiate environmental particles into the following classes: TWP, metals, minerals and biogenic/organic. We present a ML-based model developed to classify airborne samples (trained by >100,000 environmental particles including 6841 TWP), and its application within a one-year monitoring campaign at two Swiss sites. In this study, the mass concentrations of TWP in the airborne fractions PM80-10, PM10-2.5 and PM2.5-1 were determined. Furthermore, the particle size distribution and shape characteristics of 5621 TWP were evaluated. A cut through a TWP by means of FIB-SEM evidences that the mineral and metal particles typically found in TWP are not only present on the particle surface but also throughout the complete TWP volume. At the urban background site, the annual average mass fraction of TWP and micro-rubber in PM10 was 1.8% (0.28 μg/m3) and 0.9%, respectively. At the urban kerbside site, the corresponding values were 6 times higher amounting to 10.5% (2.24 μg/m3) for TWP, and 5.0% for micro-rubber.
Honey bees ( Apis mellifera L.) have been established as environmental monitors to assess the aerosol contamination of the environment in the vicinity of beehives. During their wide-ranging foraging trips, these hymenopterans catch particles in flight and while collecting nectar, pollen, or water. This study demonstrates that honeybees can be employed not only to detect major particulate matter emitters, such as mines or industrial plants, but also smaller, localized aerosol sources, such as shooting ranges. During background monitoring of particulate matter pollution, worker bees were collected from hives in rural areas of the canton and the city of Fribourg (Switzerland). The head, wings, and hind legs of the bees were investigated with Scanning Electron Microscopy coupled with X-ray spectroscopy (SEM–EDX). The analyzed particles reflect the vigorous dairy farming activity in the region (home of Gruyère cheese-making), but particles from one beehive were very exotic and typical of gunshot residues. Indeed, a shooting range was within the foraging range of the corresponding beehive. Bees, therefore, could be an ideal tool not only for monitoring significant aerosol sources but also for monitoring small ones.
Although the organic fraction of PM2.5 has been extensively studied, there is a considerable gap in understanding the organic fraction of coarse particles with diameters between 2.5 and 10 µm. We investigate the composition of coarse organic aerosol (OA) across rural, suburban, and urban areas of Switzerland. Using Aerosol Mass Spectrometer analyses of water-soluble OA extracted from collected filter samples (one entire year, 441 samples per size fraction), we identified two distinct classes of coarse OA. The first class, which constitutes 41–81% of coarse organic carbon (OC), is associated with primary biological organic carbon (PBOC). PBOC is characterized by specific marker ions (e.g., C2H5O2+) and exhibits pronounced seasonal variation, with peak concentrations observed in the summer. This seasonal trend correlates with that of molecular markers such as arabitol and mannitol, as well as the fraction of biological particles determined by automated scanning electron microscopy coupled to energy dispersive X-ray spectroscopy of individual particles. The second class, contributing 7.9–17.8% to OCcoarse, is denoted as sulfur-containing organic carbon (SCOC) due to the presence of sulfur-containing ions such as CH3SO2+. Elevated concentrations of SCOC in urban environments near roadways suggest a strong influence from non-exhaust traffic emissions and resuspended dust. While the overall variation in coarse OC between rural and urban areas is approximately 10%, PBOC concentrations are 1.4 times higher in rural areas, whereas SCOC concentrations are 1.5 times higher in urban settings. Overall, our study shows that although OCcoarse concentrations in Switzerland are relatively consistent across site types, major water-soluble sources, particle properties and composition vary considerably geographically and seasonally.
Sahara dust events can promote the formation of micrometer‑sized spherical mineral aggregates known as iberulites as they are usually found on the Iberian Peninsula. Iberulites have not, to our knowledge, been reported from Central Europe. Two formation mechanisms – in- and below scavenging – have been given. Strong iberulite fall (IFs) were observed in Western Switzerland in February 2021 when large amounts of dust were transported from the Moroccan-Algerian border towards Central Europe during a Saharan Dust Event (SDE). In contrast to the previous IFs observed on the Iberian Peninsula, this IF occurred under low-temperature conditions e.g. near the freezing point in the cloud and at the surface. The relative humidity in the first 1000 m below the clouds decreased from 70 to 40 %. and the comparison between particle-size distribution (PSD) within the iberulites and the dust PSD in the free atmosphere revealed a Greenfield gaprelative to the dust in the free atmosphere. The meteorological conditions, the microstructure of the iberulites, and the presence of a Greenfield gap point to below-cloud scavenging as the most likely formation mechanism. Further discoveries of iberulite in Swiss SDE samples suggest that the phenomenon is widespread and not only limited to regions close to the dust source.
Honey bees ( Apis mellifera L.) have been established as environmental monitors to assess the aerosol contamination of the environment in the vicinity of beehives. During their wide-ranging foraging trips, these hymenopterans catch particles in-flight and while collecting nectar. In the present work, we demonstrate that bees can not only be used to detect large particulate matter emitters, such as mines or industrial plants, but also small aerosol sources such as shooting ranges. During a background monitoring of particle matter pollution, worker bees were collected from hives located in the rural part of the canton and the city of Fribourg (Switzerland). The head, wings, and hind legs of the bees were investigated with Scanning Electron Microscopy coupled with X-ray spectroscopy (SEM-EDX). The analyzed particles reflect the vigorous dairy farming activity in the region (home of Gruyère cheese making), but bees from one beehive had very exotic particles, which turned out to be typical of gunshot residues. Indeed, a shooting range was in the roaming territory of the corresponding beehive. Bees, therefore, could be an ideal tool not only for monitoring significant aerosol sources, but also small ones.