This article investigates the performance of a vertically grown GaSb/Si tunnel field effect transistor (V-TFET) with a source pocket to enhance the performance of the device. The commercially available Silvaco TCAD has been used for simulating the proposed V-TFET structure. A low bandgap material, GaSb, is used in the source region for the first time to enhance the carrier tunneling through the source (GaSb)-channel (Si) heterojunction. The proposed V-TFET with a pocket shows the improved subthreshold swing (SS) of 26 mV/decade at VDS= 0.5 V over the V-TFET without any pocket. The effects of temperature on SS and ION/IOFF ratio along with the analog/RF figures of merit (FOMs) are also analyzed for V-TFETs with and without a pocket. The results are also compared with some recently reported TFETs. The dc and analog/RF performances of V-TFET with a pocket are shown to be better than those of the V-TFET without a pocket and other reported TFET structures. Finally, the applications of V-TFETs with and without a pocket in designing inverter and ring oscillator circuits have been demonstrated. The dc and transient responses of the V-FET-based inverter and ring oscillator circuits have been analyzed using the Verilog-A model in the CADENCE tool.
27 July 2022 in IEEE Transactions on Electron Devices
A novel GaSb/GaAs type-II heterojunction TFET on SELBOX substrate (HJ-STFET)-based dielectric-modulated ultrasensitive label-free biosensor has been demonstrated in this article. The SELBOX substrate has been used in the proposed TFET-based sensor to reduce the lattice heat and improve the $\textit{I}_{\biosub{on}}$ / $\textit{I}_{\biosub{off}}$ ratio. Cavities in the gate oxide of the TFET are created to form dual-cavity (DC) HJ-STFET structure. These cavities contain the biomolecules to be sensed through the principle of gate-dielectric modulation. To validate the results, the analytical modeling of surface potential has been compared to simulated outcomes for different dielectric constant values of biomolecules. The threshold voltage sensitivity ( $\textit{S}_{\text{VT}}$ ) and $\textit{I}_{\biosub{on}}/\textit{I}_{\biosub{off}}$ sensitivity parameters of the proposed DC-HJ-STFET structure have been thoroughly investigated considering different biomolecules. The proposed DC-HJ-TFET structure is shown to have a higher current sensitivity ( $\sim $ 6.67 $\times$ 10 $^{\text{11}}$ ) and threshold voltage sensitivity (0.37 V) values over some recently reported TFET-based biosensors. Finally, we have verified the drain and back gate biasing, as well as linearity fit verification, on the proposed biosensor’s performance.
This research introduces a unique fetal monitoring system grounded in the bioimpedance technique, also recognized as Electrical Impedance Tomography (EIT). The mechanism comprises a phantom, experimental setup, and information acquisition methods, designed to evaluate its capacity via phantom (mother)-based complete evaluations. To validate its effectiveness, a sequence of experiments are performed with the use of diverse phantoms geared up with 8, or 4 electrodes. By making use of EIT current patterns and measuring the ensuing voltage points, the device’s abilities have been assessed. The proposed EIT-based fetal monitoring system achieved accurate impedance measurements with voltage outputs ranging from 0.3 mV to 4.38 mV across various phantoms. EIT gives distinct advantages over traditional imaging modalities, allowing noninvasive monitoring and recording of dispensed electric-powered fields within a closed object. This revolutionary approach is characterized by its person-pleasant interface, affordability, and suitability for mass healthcare applications, making it available to underserved communities and primary healthcare workers.
14 August 2026 in Journal of Discrete Mathematical Sciences and Cryptography
This potential has sparked significant interest across industries and in academic circles. IoT evolving into a versatile utility, offering advanced capabilities...