Fiber-optic surface plasmon resonance (SPR) sensors possess the advantages of small size, flexible, allowing for a smaller sample volume, easy to be integrated, and high sensitivity. They have been intensively developed in recent decades. However, the polarizing nature of the surface plasmon waves (SPWs) always hinders the acquisition of SPR spectrum with high signal-noise ratio in wavelength modulation unless a polarizer is employed. The addition of polarizer complicates the system and reduces the degree of compactness. In this work, we propose and demonstrate a novel, polarization-independent fiber-optic SPR sensor based on a BK7 bi-prism with two incident planes orthogonal to each other. In the bi-prism, TM-polarized components of non-polarized incident lights excite SPWs on the first sensing channel, meanwhile the TE components and the remaining TM components are reflected, then the reflected TE components serve as TM components of incident lights for the second sensing channel to excite SPWs. Simulations show the proposed SPR structure permit us to completely eliminate the polarization dependence of the plasmon excitation. Experimental results agree well with the simulations. This kind of devices can be considered an excellent option for development of simple and compact SPR chemical sensors.

We propose a wideband transverse magnetic-reflected polarizing film composed of Cr and SiO2. Based on the polarization characteristics of reflected light from Cr/SiO2 film, the film can serves as a polarizer to severely attenuate the transverse electric (TE)-polarized light and reflect the transverse magnetic (TM)-polarized light in a wavelength range from 600 to 900 nm. By suitably choosing the film thicknesses, the operation angles of such polarizers can be adjusted over a wide angle range greater than the critical angle of total reflection. Cr/SiO2 film has potential use in surface plasmon resonance (SPR) sensors based on Kretchmann configuration to form integrated structures.