During the design of nonimaging Fresnel lenses, the reflectance losses at the refracting surfaces should be taken into account because, depending on the parameters of each prism, semiacceptance angle and output angle , these losses can decrease the total efficiency of the lens. On this subject, an analysis and comparison between a Fresnel lens composed only of refractive prisms and others with total internal reflection (TIR) prisms are presented and, using this information, a design method of hybrid Fresnel lenses composed of refractive and TIR prisms is proposed to reduce reflectance losses from the surface. The work presents the radiance profile and transmittance for a Fresnel lens of each type, to compare its advantages and disadvantages providing an alternative for the design and construction of nonimaging Fresnel lenses according to optical devices requirements.
Among the main challenges for systems based in solar concentrators and plastic optical fibers (POF) the accuracy needed for the solar tracking is founded. One approach to overcome these requirements is increasing acceptance angle of the components, usually by secondary optical elements (SOE), however this technique is effective for photovoltaic applications but it has not been analyzed for systems coupled to POFs for indoor illumination. On this subject, it is presented a numerical analysis of a solar collector assembled by a Fresnel lens as primary optical element (POE) combined with a compound elliptical concentrator (CEC) coupled to POF in order to compare its performance under incidence angle direction and also to show a trade-off analysis for two different Fresnel lens shapes, imaging and nonimaging, used in the collector system. The description of the Fresnel lenses and its designs are included, in addition to the focal areas with space and angular distribution profiles considering the optimal alignment with the source and maximum permissible incident angle for each case. For both systems the coupling between the optical components is analyzed and the total performance is calculated, having as result its comparison for indoor illumination. In both cases, the systems have better performance increasing the final output power, but the angular tolerance only was improved for the system with nonimaging concentrator that had an efficiency over 80% with acceptance angles
Surface plasmon resonance (SPR) sensors based on nanostructured metasurfaces offer enhanced sensitivity through engineered electromagnetic responses. In this study, we present an analytical–numerical investigation of the plasmonic behavior of gold nanopillar (Au-NP) and nanohole (Au-NH) arrays under both p- and s-polarized illumination, employing the Effective Medium Theory (EMT) in combination with the Transfer Matrix Method (TMM). This framework provides a consistent and computationally efficient description of the macroscopic optical response of multilayer plasmonic systems. For p-polarization, the nanostructure geometry strongly modulates the real and imaginary parts of the effective permittivity, with nanoholes supporting stronger SPR coupling and reduced optical losses compared to nanopillars. Under s-polarization, the effective permittivity remains largely invariant, driven mainly by filling fraction. The analysis reveals that polarization-dependent effects arise from variations in boundary-condition coupling rather than distinct localized resonances, aligning with classical plasmonic theory. Benchmarking against analytical dispersion relations and published experimental data for Au/BK7 systems shows close agreement within ±2°, confirming the physical consistency of EMT–TMM predictions. No full-wave simulations or experiments are presented; all results derive from analytical-numerical modeling. Rather than proposing new excitation mechanisms, this study provides a validated theoretical framework for understanding how polarization and nanostructural filling fraction jointly modulate SPR coupling in thin-film metasurfaces. The results offer a foundation for rational design and optimization of plasmonic coatings and SPR sensors with tunable surface sensitivity.
Surface plasmon resonance (SPR) sensors based on nanostructured metasurfaces offer enhanced sensitivity through engineered electromagnetic responses. In this study, we present an analytical and numerical investigation of the plasmonic behavior of gold nanopillar (Au-NP) and nanohole (Au-NH) arrays under both p- and s-polarized illumination, employing the Effective Medium Theory (EMT) in combination with the Transfer Matrix Method (TMM). The study combines Effective Medium Theory (EMT) and the Transfer Matrix Method (TMM) to describe the macroscopic optical response of multilayer plasmonic systems. For p-polarization, the nanostructure geometry strongly modulates the real and imaginary parts of the effective permittivity, with nanoholes supporting stronger SPR coupling and reduced optical losses compared to nanopillars. Under s-polarization, the effective permittivity remains largely invariant, primarily driven by the filling fraction. The analysis reveals that polarization-dependent behavior arises from boundary-condition-mediated coupling mechanisms governing surface plasmon excitation, aligning with classical plasmonic theory. Benchmarking against analytical dispersion relations and published experimental data for Au/BK7 systems shows close agreement within ±2°, confirming the physical consistency of the EMT–TMM framework. These results provide a systematic description of how polarization and filling fraction jointly modulate SPR coupling. The results offer a foundation for the rational design of plasmonic coatings and SPR-supporting metasurfaces by elucidating macroscopic coupling trends; however, no quantitative sensor performance metrics, such as refractive index sensitivity or figure of merit, are evaluated in this work.
The efficiency of sunlight collection systems is related to the optical element used as a collector. On this subject, the design of a nontracking solar collector that consists of a segmented nonimaging Fresnel dome is presented. It is formed by the conjunction of different zones for solar collection, where each one is a nonimaging Fresnel lens that collects a specific angular range () of sunlight received in the northeast of Mexico, but the methodology presented can be easily extended to other geographic locations. The final design is a semistationary segmented collector with a 100-cm diameter and 50-cm focal length that needs a 180-deg rotation over the -plane in each equinox. The numerical simulations show that the nontracking segmented collector has a combined acceptance semiangle of with an average efficiency of over 67% from 9:00 to 18:00 h. The spatial and angular distributions of the sunlight collected are also included. This design has a collection area equal to that of a single nonimaging Fresnel lens with an acceptance semiangle of . These results are reproducible and provide valuable data for designing nontracking solar collectors based on nonimaging Fresnel lens.