The traditional craft of marine launching rubber gasbag that made by hand laying cord fabric has the disadvantages of irregular reinforcing direction and discontinuity of cord, which leads to the limitation of bearing capacity of gasbag and poor reliability. Based on the analysis of the structure of the rubber gasbag and geodesic winding pattern used in marine launching, the winding process design and experiment of the fiber reinforced rubber gasbag are carried out to solve the problem. The numerical simulation of the wound rubber gasbag is established by the finite element software ABAQUS in order to study the geometrical and contact nonlinearity of the gasbag, and the nonlinear relationship of parameters in application process, and then compare the application performance with those of the traditional cord fabric placement molding. Finally, the winding pattern test and deformation simulation experiment are carried out to verify the fact that the reinforced rubber gasbag with glass fiber / polyurethane composite material has a higher bearing capacity compared with the traditional handmade rubber gasbag. Thus, it provides theoretical and experimental evidence for the winding process of rubber gasbag.
Induction heating is a promising technology for the rapid and energy-efficient curing of carbon fiber-reinforced polymer (CFRP) composites. However, in multi-coil systems, electromagnetic coupling and nonlinear thermal dynamics readily produce non-uniform temperature fields that compromise curing quality. To address this issue, an integrated framework combining mesoscopic mechanism analysis, coupled dynamic modeling, and curing-oriented intelligent control was developed. A mesoscopic finite element model was first established to clarify the origin of non-uniform heat generation in CFRP under multi-coil excitation. Based on this physical insight, a control-oriented dual-coil dynamic model was derived through system identification, and a fuzzy PID controller was then globally tuned offline using the whale optimization algorithm (WOA) for temperature regulation. Simulation results show that the optimized controller reduces overshoot by approximately 84% in the primary zone, shortens the settling time to 100 s, and improves inter-zone synchronization and disturbance rejection under multiple disturbance conditions. These results demonstrate that linking mechanism-level understanding with control-oriented optimization provides an effective route to improving temperature uniformity and process reliability in multi-coil CFRP induction curing.