Satellites are not necessarily something huge and expensive. Small satellites have been designed (or are being designed) by several universities. These satellites must fit within tight cost constraints, for the launch and the actual satellite hardware. Success in developing these satellites, and the related technologies and methods, would enable an easier access to space, especially for small and medium enterprises (SMEs), leading to new markets and applications. We present the architecture of a small university satellite that we developed. The main design criteria were low costs and fault tolerance. To meet the first one, we chose to use commercial off the shelf (COTS) components wherever possible. For the second one, we replicated all the satellite critical functions, using different technologies and solutions, while constantly monitoring the state of the system for failures. The focus is on overall organization, design partitioning, and details of the actual hardware. We show that the development of a low-cost satellite is feasible with a limited budget.
Spaceborne Global Navigation Satellite Systems (GNSS) receivers have become ubiquitous sensors for spacecraft navigation, especially in Low Earth Orbits (LEOs), often also supporting science endeavors or as acting dedicated science payloads. Due to the large number of space-capable GNSS receiver models available, spacecraft designers, as well as scientists, may find it difficult to have or gain an overview of suitable state-of-the-art models for their purposes and constraints. Based on a literature review that included more than 90 different receiver models, this paper aims to provide an overview of space-capable GNSS receivers that have a heritage in space missions. It analyses trends from the collected data and provides an outlook on miniaturized GNSS receiver models, which have a high potential of being used in future space missions.
Many universities are now involved in projects related to design, assembly, and operation of small satellites. These projects, with participation of researchers and students, and support of external companies, do not aim to compete with commercial satellites; the main goal is to increase the experience level which contributes to make space applications affordable also to small organizations. For students, participation in the complete process of satellite design, assembly, and testing, offers a unique experience within an interdisciplinary complex project. External companies are involved in creating a community of researchers focused on space applications, thus creating new markets and opportunities. The paper describes the architecture and design solutions of a small satellite developed at Politecnico di Torino in the above mentioned context. The main design goal was to combine the usually conflicting cost and reliability constraints; cost has been limited by using properly selected COTS (commercial off the shelf) devices. Reliability has been achieved through redundancy and design diversity. Focus of the paper is on overall satellite design and architecture, with details of solutions to enhance reliability down to the hardware level. The experience led to the development of a new course (master level) and to several new projects currently under way.