A new sulfonic/carboxylic dual‐acid catalyst based on sulfur‐rich graphene oxide (GO‐S) was readily prepared and used as a highly efficient and reusable solid acid catalyst toward the esterification of oleic acid with methanol for biodiesel production. Higher yields of methyl oleate (98 %) and over 3 times higher turnover frequencies (TOFs) were observed for the GO‐S dual‐acid catalyst, compared to liquid sulfuric acid or other carbon‐based solid acid catalysts. The “acidity” of sulfonic acid groups was enhanced by the addition of carboxylic acid groups as the combination of the two acids enhances their inherent activity by associative interaction.
Biomass gasification has been regarded as a promising technology to utilize bioenergy sustainably. However, further exploitation of biomass gasification still needs to overcome a significant number of technological and logistic challenges. In this chapter, the current development status of biomass gasification, especially for the activities in China, has been presented. The biomass characters and the challenges associated with biomass collection and transportation are covered and it is believed that biomass gasification coupled with distributed power generation will be more competitive in some small communities with large amount of local biomass materials. The technical part of biomass gasification is detailed by introducing different types of gasifiers as well as investigating the minimization methods of tar, which have become more and more important. In fact, applying biomass gasification also needs to deal with other socio-environmental barriers, such as health concerns, environmental issues and public fears. However, an objective financial return can actually accelerate the commercialization of biomass gasification for power and heat generation, and in the meantime, it will also contribute to other technical breakthroughs.
Biodiesel, which is a blend of fatty acid methyl esters (FAME), has garnered significant attention as a promising alternative to petroleum-based diesel fuel. Nevertheless, the commercial production of biodiesel faces challenges due to the high costs associated with feedstock and the non-recyclable homogeneous catalyst system. To address these issues, a solid catalyst derived from construction industry waste cement was synthesized and utilized for biodiesel production from waste cooking oil (WCO). The catalyst’s surface and physical characteristics were analyzed through various techniques, including Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier Transform Infrared Spectroscopy (FTIR). The waste-cement catalyst demonstrated remarkable catalytic performance and reusability in the transesterification of WCO with methanol for biodiesel synthesis. A maximum biodiesel yield of 98.1% was obtained under the optimal reaction conditions of reaction temperature 65 °C; methanol/WCO molar ratio 16:1; calcined cement dosage 3 g; and reaction time 8 h. The apparent activation energy (Ea) from the reaction kinetic study is 35.78 KJ·mol−1, suggesting that the transesterification reaction is governed by kinetic control rather than diffusion. The biodiesel produced exhibited high-quality properties and can be utilized in existing diesel engines without any modifications. This research presents a scalable, environmentally benign pathway for WCO transesterification, thereby contributing significantly to the economic viability and long-term sustainability of the global biodiesel industry.