The aim of this study is the valorization of the Moroccan clays (QC-MC and QC-MT) from the Middle Atlas region as adsorbents for the treatment of water contaminated by cadmium Cd (II) ions. The physicochemical properties of natural clays are characterized by ICP-MS, XRD, FTIR, and SEM techniques. The adsorption process is investigated as a function of adsorbent mass, solution pH, contact time, temperature, and initial Cd (II) ion concentration. The kinetic investigation shows that the adsorption equilibrium of Cd (II) ions by both natural clays is reached after 30 min for QC-MT and 45 min for QC-MC and fits well to a pseudo-second-order kinetic model. The isotherm study is best fitted by a Freundlich model, with the maximum adsorption capacity determined by the linear form of the Freundlich isotherm being 4.23 mg/g for QC-MC and 5.85 mg/g for QC-MT at 25°C. The cadmium adsorption process was thermodynamically spontaneous and exothermic. The regeneration process showed that these natural clays had excellent recycling capacity. Characterization of the Moroccan natural clays before and after the adsorption process through FTIR, SEM, XRD, and EDX techniques confirmed the Cd (II) ion adsorption on the surfaces of both natural clay adsorbents. Overall, the high adsorption capacity of both natural clays for Cd (II) ions removal compared to other adsorbents motioned in the literature indicated that these two natural adsorbents are excellent candidates for heavy metal removal from aqueous environments.

Growing concerns about environmental pollution and the sustainability of conventional nanomaterial synthesis have accelerated interest in plant-based routes for nanoparticle production. This review provides an in-depth analysis of more than 290 peer-reviewed research and review articles published between 2010 and 2025, extracted from the Web of Science and Scopus databases, on the green synthesis of metallic and metal oxide nanoparticles using plant extracts, with particular emphasis on their characterization and application in water treatment. Plant-derived phytochemicals serve as natural reducing and stabilizing agents, enabling nanoparticle formation without hazardous reagents. Key physicochemical characterization techniques, including UV–Visible spectroscopy, X-ray diffraction, Fourier Transform Infrared spectroscopy, scanning and transmission electron microscopy, and energy-dispersive X-ray analysis, are evaluated for their roles in confirming nanoparticle structure, morphology, surface chemistry, and optical behavior. The review focuses on water purification applications, highlighting adsorption and photocatalytic degradation as the most extensively investigated removal pathways. Particular attention is given to widely studied material classes such as silver, zinc oxide, titanium dioxide, and iron-based nanoparticles, which demonstrate effective removal of heavy metals, synthetic dyes, pesticides, and pharmaceutical residues. Current limitations related to synthesis reproducibility, mechanistic understanding, stability, and scalability are critically discussed. The review concludes by identifying priority research directions, including standardized synthesis protocols, deeper chemical analysis of plant extracts, and the integration of green nanoparticles into immobilized and membrane-based systems to advance their practical implementation in sustainable water treatment technologies.

In this study, a new reactor was carried out to recover UV solar radiation to degrade the methylene blue (MB) and methyl orange (MO) dyes using the raw phosphate doped by TiO₂. The raw phosphate (Pht), TiO₂, and TiO₂/doped phosphate (TiO₂/Pht) were characterized by several techniques to determine their physicochemical properties. The performance of MB and MO photocatalytic degradation was very high around 88% for MO and 99% for MB using 1 g of TiO₂/Pht at midday. This new process is capable of degrading the high concentrations of dyes in water, especially the azo dyes which are hard to treat.