Power management strategies play a key role in the design process of hybrid electric vehicles. Electric Assist Control Strategy (EACS) is one of the popular power management strategies for hybrid electric vehicles (HEVs). The present investigation proposes a new framework to advance the EACS. Dynamic Programming method is applied to an HEV model in several drive cycles, and as a result, some optimal operating regions are found. The obtained regions are almost distinct, and consequently, some threshold lines can be defined to separate them. The obtained threshold lines are used to eliminate some parameters of the EACS to reduce its sensitivity to the driving behavior. It is shown that by applying the mentioned modification, the sensitivity of the EACS decreases without a significant increase in the HEV’s FC. All in all, our findings indicate the effectiveness of the proposed methodology to improve the EACS strategy for HEV supervisory control applications.
4 August 2025 in IEEE Transactions on Instrumentation and Measurement
Transit time ultrasonic flowmeters offer a variety of advantages over other flowmetry methods; including low pressure loss, no moving parts, self-diagnosing capabilities, and possibility of hot-tap installation. In a transit time ultrasonic flowmeter, the average flow velocity is calculated from the upstream and downstream time-of-flights (ToFs) of the sound. To improve the ToF measurement, a novel signal processing method named pattern matching is introduced in this article. In this method, the wave packet is compared with a trainable pattern to measure the ToF. An ultrasonic flowmeter setup is designed to record the wave signals on a computer as an offline dataset. The performance of the pattern matching method is evaluated by its comparison with common classic and state-of-the-art algorithms by implementing them on the same dataset. The standard deviation (SD) of the time-flight in zero flow is used as the performance criterion. The results demonstrate that the pattern matching method (average SD $= 0.87~\mu $ s) exhibits the best performance compared to various threshold methods and cross correlation method. Ultimately, the pattern matching method along with state-of-the-art algorithms are implemented on an embedded hardware in a flow test setup. Only pattern matching method was able to follow the flow rate profile in high noise environment and had significantly lower error and better repeatability compared to other methods (error reduced from 14.1% to 0.322% compared to the second best performing cross correlation method).
Time-of-flight (TOF) measurement is the core functionality of signal processing units of ultrasonic flowmeters and distance meters. The received ultrasonic wave packet signal has a bell-shaped envelope, with an onset often obscured by noise. Various digital signal processing methods have been proposed to improve TOF measurement accuracy, employing either a limited set of selected data points from the received or conditioned signal, or all the data points within a defined segment of the received signal. The cross-correlation, model fitting and the pattern matching methods are prominent among those that leverage full-data approaches. This study introduces and evaluates two batch training strategies in pattern matching method: parametric modeling and optimized averaging. An offline dataset of 8000 received signals was recorded to implement the batch training methods. The first 4000 signals were used as the training data, and the subsequent 4000 were used as the test data. The conventional packet-envelope threshold and cross-correlation methods were implemented as baselines, yielding average errors of 9.10% and 4.32% and standard deviations of 2.38 μs and 1.95 μs at zero-flow respectively. In comparison, the optimized average method and the parametric model method (using the extended model) were able to reduce the standard deviation in the zero flow to 0.52 μs and 0.19 μs, and the average flow measurement error to 5.53% and 3.28% respectively.
This paper proposes an Age Dependent Clustering (ADC) structure to be used for prognostics. To achieve this aim, a step-by-step methodology is introduced, that includes clustering, reproduction, mapping and finally estimation of Remaining Useful Life (RUL). In the mapping step, neural fitting tool is used. Considering age based clustering concept, determination of main elements of the ADC model is discussed. Genetic algorithm (GA) is used to find the elements of the optimal model. Lastly, fuzzy technique is applied to modify the clustering. The efficacy of the proposed method is demonstrated with a case study on the health monitoring of some turbofan engines. The results show that the concept of clustering even without optimization processes is efficient even for the simplest form of performance. However, by optimizing structure elements and fuzzy clustering, the prognosis accuracy increases up to 71%. The effectiveness of age dependent clustering in prognosis is proven in comparison with other methods.
1 January 2025 in International Journal of Engineering
Rotating cylindrical shells have a wide range of practical applications; however, they are prone to vibrations. Despite numerous theoretical studies on vibration characteristics of rotating cylindrical shells, experimental validation remains limited. Using non-contact vibration sensors for an experimental study offers significant advantages, such as eliminating mass effects and avoiding complex wiring associated with attachment to rotating shells. However, achieving an adequate data acquisition frequency by non-contact sensors in modal analysis of rotating cylindrical shells necessitates deploying multiple sensors circumferentially, which makes it costly and complex. This difficulty could be mitigated by correct shell selection to enable experimental validation of theoretical studies. The primary objective of the present study is to determine with which dimensions and rotational velocities, an experimental result of vibration characteristics for a rotating cylindrical shell could be attained by fewer non-contact sensors, which could be interpreted as a first pace toward experimental validation of theoretical methods. To achieve this innovative goal, a parametric study was conducted using an accurate finite element method (FEM) in ANSYS to illustrate how rotational velocity and dimensions affect the required number of sensors. Using the results of the parametric study, optimum values of rotational speed and dimensional parameters have been determined in a way that the experimental vibration analysis could be accomplished with a minimum number of required circumferential non-contact sensors. In the case of the present study, the number of required circumferential sensors is reduced from about 200 for an unsuitable choice to 24 for the choice of the present paper.
Accurate real-time detection, geolocation, and counting of palm trees are essential for plantation management, yield estimation, and resource allocation in precision agriculture. Traditional approaches such as manual surveys or offline image processing are labor-intensive and unsuitable for large-scale applications. This study introduces a fully onboard real-time framework that integrates Unmanned Aerial Vehivle (UAV) imagery, the YOLOv12 deep learning model, and a camera projection technique to detect, geolocate, and count palm trees directly during flight. The lightweight YOLOv12n variant, deployed on an NVIDIA Jetson Nano edge device, achieved a detection precision of 92.4%, an average geolocation error of 2.14 m, and a counting error of only 0.2% across 915 trees. Unlike many existing methods that rely on offline processing or offboard computation, the proposed system performs all computations in real time, enabling immediate decision-making for tasks such as plantation density analysis, replanting planning, and yield forecasting. Experimental results demonstrate that the proposed approach provides a scalable, cost-effective, and autonomous solution for modern precision agriculture.