Composite materials with carbon nanotube and graphene additives have long been considered as exciting prospects among nanotechnology applications. However, after nearly two decades of work in the area, questions remain about the practical impact of nanotube and graphene composites. This uncertainty stems from factors that include poor load transfer, interfacial engineering, dispersion, and viscosity-related issues that lead to processing challenges in such nanocomposites. Moreover, there has been little effort to identify selection rules for the use of nanotubes or graphene in composite matrices for specific applications. This review is a critical look at the status of composites for developing high-strength, low-density, high-conductivity materials with nanotubes or graphene. An outlook of the different approaches that can lead to practically useful nanotube and graphene composites is presented, pointing out the challenges and opportunities that exist in the field.

As electromagnetic (EM) pollution continues to increase, electromagnetic interference (EMI) shielding materials have been intensively evaluated in terms of two main shielding mechanisms of reflection and absorption. Since the shielding effectiveness (SE) is represented in the logarithmic scale and in a coupled way of transmission (SE_T), absorption (SE_A), and reflection (SE_R), often there is a misinterpretation that the EM wave reflectors are regarded as EM wave-absorbing materials. Surprisingly, we found that many materials reported as an EM wave absorber in the literature provide, in fact, less than 50% of EM wave-absorbing capability, i.e., over 50% of EM wave-reflecting feature. According to the theory and definition of EMI SE, the absorption-dominant EMI shielding materials should have the ratio of absorption to incident energy (A) as A > 0.5, which corresponds to a necessary condition that SE_R < 3.01 dB. The SE_R subsequently gives SE_A in relation to SE_T. Using this criterion, we classified the EMI shielding materials with their shielding mechanism. The proposed methodology provides significant insight into the evaluation and development of EMI shielding materials.

There have been a number of theoretical and experimental studies on tensile properties of carbon nanotubes (CNT), reporting the Young’s modulus of the individual CNT up to 1 TPa. Although CNT shows the promise to be used as reinforcement in a high modulus/strength composite material, it exhibits quite disappointing in terms of modulus or strength. Along with recent advance in CNT growth technique, we will be able to directly measure tensile properties of millimeter-long MWCNTs. This study firstly tackles the direct measurement of the tensile properties of millimeter-long MWCNTs that can be used as reinforcement in a composite system. A carefully designed tensile testing technique for the MWCNTs is developed, which allows us to obtain more accurate and reliable measured values. The average tensile strength and Young’s modulus of the CNTs investigated in this study are measured to be 0.85 GPa and 34.65 GPa, respectively. Also, this work statistically investigates the effect of the CNT dimensions including length, diameter and volume on the tensile properties. To the best of our knowledge, this is the very first report on the tensile properties of macroscopically long and continuous CNTs.