In the past, Unmanned Aerial Vehicles (UAVs) were mostly used in military operations to prevent pilot losses. Nowadays, the fast technological evolution has enabled the production of a class of cost-effective UAVs that can service a plethora of public and civilian applications, especially when configured to work cooperatively to accomplish a task. However, designing a communication network among the UAVs is a challenging task. In this article, we propose a centralized UAV placement strategy, where UAVs are used as flying access points forming a mesh network, providing connectivity to ground nodes deployed in a target area. The geographical placement of UAVs is optimized based on a Multi-Objective Evolutionary Algorithm (MOEA). The goal of the proposed scheme is to cover all ground nodes using a minimum number of UAVs, while maximizing the fulfillment of their data rate requirements. The UAVs can employ different data rates depending on the channel conditions, which are expressed by the Signal-to-Noise-Ratio (SNR). In this work, the elitist Non-Dominated Sorting Genetic Algorithm II (NSGA-II) is used to find a set of optimal positions to place UAVs, given the positions of the ground nodes. We evaluate the trade-off between the number of UAVs used to cover the target area and the data rate requirement of the ground nodes. Simulation results show that the proposed algorithm can optimize the UAV placement given the requirement and the positions of the ground nodes in the geographical area.

Immediately after a disaster, such as a flood, wildfire or earthquake, networks might be congested or disrupted and not suitable for supporting the traffic generated by rescuers. In these situations, the use of a traditional fixed-gateway approach would not be effective due to the mobility of the rescuers. In the present work, a double-layer network system named LoRaUAV has been designed and evaluated with the purpose of finding a solution to the aforementioned issues. LoRaUAV is based on a WiFi ad hoc network of Unmanned Aerial Vehicle (UAV) gateways acting as relays for the traffic generated between mobile LoRaWAN nodes and a remote Base Station (BS). The core of the system is a completely distributed mobility algorithm based on virtual spring forces that periodically updates the UAV topology to adapt to the movement of ground nodes. LoRaUAV has been successfully implemented in ns-3 and its performance has been comparatively evaluated in wild area firefighting scenarios, using Packet Reception Ratio (PRR) and end-to-end delay as the main performance metrics. It is observed that the Connection Recovery and Maintenance (CRM) and Movement Prediction (MP) mechanisms implemented in LoRaUAV effectively help improve the PRR, with the only disadvantage of a higher delay affecting a small percentage of packets caused by buffer delays and disconnections.

In the past, Unmanned Aerial Vehicles (UAVs) were mostly used in the military operations to prevent pilot losses. Nowadays, the fast technological evolution enables the production of a class of cost-effective UAVs which can service a plethora of public and civilian applications, specially when configured to work cooperatively to accomplish a task. However, designing a communication network among the UAVs is challenging task. In this article, we propose a centralized UAV placement strategy, where UAVs are used as flying access points forming a mesh network, providing connectivity to ground nodes deployed in a target area. The geographical placement of UAVs is optimized based on a Multi-Objective Evolutionary Algorithm (MOEA). The goal of the proposed scheme is to cover all ground nodes using a minimum number of UAVs, while maximizing the fulfillment of their data rate requirements. The UAVs can employ different data rates depending on the channel conditions, which are expressed by the Signal-to-Noise-Ratio (SNR). In this work, elitist Non-Dominated Sorting Genetic Algorithm II (NSGA-II) is used to find a set of optimal positions to place UAVs, given the positions of the ground nodes. We evaluate the trade-off between the number of UAVs used to cover the target area and the data rate requirement of the ground nodes. Simulation results show that the proposed algorithm can optimize the UAV placement given the requirement and the positions of the ground nodes in the geographical area.

In this paper, we make use of MOEA to optimize the deployment of Unmanned Aerial Vehicles (UAVs) as access points in a target area taking into account two objectives: (1) minimize the number of UAVs, and (2) maximize the throughput at the destination node(s). NSGA-II is used as MOEA, where the number of UAVs is given by the number of deployed UAVs forming the network. An embedded genetic algorithm (inner-GA) is used to find paths that maximize the throughput. To find consistent solutions for the throughput, we use an existing fixed point algorithm (FPA) that operates on a given throughput approximation model. Simulation results show that our approach can find good solution when minimizing the number of UAVs while providing high throughput.

An integrated simulation model of power system protection schemes and IEC 61850 process bus communication models was developed for the design of substation automation systems of the future. The model is capable of reproducing a sequence of the relevant events and equipment states under different operation scenarios, including normal operation and power system fault disturbances. The model includes a description of the power system, the protection scheme, including its several intelligent electronic devices, and the process bus communication network. The model allows an assessment of the functional correctness of steady-state operation of the protection scheme as well as during a power system fault clearance process. It also allows the performance evaluation of the underlying communication network. The capabilities of the model are illustrated with an example scenario of power system fault followed by circuit breaker failure.