Two-dimensional (2D) semiconductors are being considered as alternative channel materials as silicon-based field-effect transistors (FETs) have reached their scaling limits. Recently, air-stable 2D selenium nanosheet FETs with a gate length of 5 µm were experimentally produced. In this study, we used an ab initio quantum transport approach to simulate sub-5 nm gate-length double-gate monolayer (ML) selenene FETs. When considering negative-capacitance technology and underlap, we found that 3 nm gate-length p-type ML selenene FETs can meet the 2013 ITRS standards for high-performance applications along the armchair and zigzag directions in the 2028 horizon. Therefore, ML selenene has the potential to be a channel material that can scale Moore’s law down to a gate length of 3 nm.
31 March 2026 in The European Physical Journal Special Topics
Dye-sensitized solar cells (DSCs) have garnered significant attention due to their high power conversion efficiency and low production cost-effectiveness. In this study, we developed a hierarchically structured three-layer TiO2 photoanode via hydrothermal synthesis to significantly enhance DSC performance. The optimized device achieved a short-circuit current density of 16.92 mA/cm2 and a photoelectric conversion efficiency of 8.34%, representing improvements of 15.67% and 20.5%, respectively, compared to traditional DSCs with a single-layer TiO2 photoanode in our study. The significance lies in the rational design principle rather than absolute efficiency. This performance enhancement stems from the complementary functions of each architectural layer: (1) a bottom layer of TiO2 nanocrystals providing high surface area for dye adsorption, (2) an intermediate layer of vertically aligned TiO2 nanorods enabling efficient electron transport, and (3) a top layer of TiO2 microspheres simultaneously boosting dye loading and light harvesting through enhanced light scattering. Our findings demonstrate that rational design of multi-layered photoanode architectures can effectively address the competing demands of surface area, charge transport, and light management in high-performance DSCs.