Acquisition, tracking, and pointing (ATP) mechanisms are generally adopted for optical wireless communications (OWCs) to maintain a strict alignment state for reliable communication. ATP mechanisms conventionally employ beacon lights to determine the orientation of the remote optical terminal. They typically cannot maintain a steady alignment under mobile conditions. A novel visual tracking approach is proposed to address this issue by establishing a shape beacon at the OWC terminals. The shape beacon can be sensed from virtually all directions with a camera; hence, visual tracking is an acceptable ATP solution for mobile OWCs. Results of numeric analysis indicate that visual tracking is suitable for mobile OWCs as well as conventional OWCs with acceptable accuracy. Experiments were performed to demonstrate the visual tracking procedures using the vehicle itself as the shape beacon.
A frequency doubling approach for optical generation of tunable microwave and millimetre-wave signals is proposed and verified experimentally. The experimental setup is based on an optical phase modulator and a simple uniform fibre Bragg grating. The generated signal is of high quality and can be tuned.
Hybrid free‐space optical and radio frequency (FSO/RF) systems have attracted much attention for more than a decade because of their enhanced reliability and capacity as comparison to single FSO or RF systems. Existing schemes to construct such a hybrid system are usually to use either switching or encoding/decoding strategies for combination of channels. The proposed scheme, based on packet sharing strategy of Ethernet link aggregation, provides a different way to combine FSO and RF channels. Theoretical analysis and Experimental results show that the proposed scheme does enhance the reliability and utilize both channel capacities for a multi‐channel system. Moreover, this scheme is simple and scalable because more channels can be combined based on such a packet sharing strategy without modifying the physical channel structures, therefore, this scheme may provide a good solution for constructing an efficient and cost‐effective hybrid FSO/RF system.
24 October 2019 in Microwave and Optical Technology Letters