To address the issues of excessive sheet metal thinning and geometric deviation in single point incremental forming (SPIF), this paper proposed a bi-objective process parameter optimization framework for Al1060 sheet based on a multilayer perceptron (MLP) surrogate model and an improved multi-objective grey wolf optimization (IMOGWO) algorithm. Finite element simulations based on ABAQUS were conducted to generate a dataset considering variations in tool radius, initial sheet thickness, tool path strategy, step depth and forming angle. The trained MLP was used as the objective function in the optimization process to enable the rapid prediction of forming quality. The IMOGWO algorithm, enhanced by the Spm chaotic mapping initialization, an improved convergence coefficient updating mechanism and associative learning mechanism, was then employed to efficiently search for Pareto optimal solutions. For a truncated conical component case, optimal parameter sets were selected from the Pareto front via the entropy-weighted TOPSIS method for order preference by similarity to an ideal solution. Experimental verification showed close agreement with the simulated results, with relative errors of only 0.58% for the thinning rate and 3.10% for the geometric deviation. This validation demonstrates the feasibility and potential of the proposed method and its practical potential for improving the quality of SPIF forming.

Single-point incremental forming (SPIF) produces localized plastic deformation, resulting in thickness reduction, geometrical deviation, and microstructural evolution. To establish the relationship between forming quality and microstructural response, this study develops a cross-scale analysis framework integrating finite element simulation, Kocks–Mecking (K–M)-based statistically stored dislocation (SSD) density inference, metallographic observation and electron backscatter diffraction (EBSD) characterization. Applied to an Al 1060 truncated-cone part, the framework converts the simulated equivalent plastic strain (PEEQ) into SSD density via the K–M model calibrated using the Voce hardening model and the Taylor relation. The inferred SSD density distribution is then spatially correlated with thinning rate, geometrical deviation, grain size, grain-boundary misorientation, kernel average misorientation (KAM), and geometrically necessary dislocation (GND) density across different forming regions. The inferred SSD density rapidly approached a saturation level of 1.55 × 10¹³ m⁻², while the high-SSD density region progressively expanded during forming. This regional evolution was qualitatively consistent with the EBSD observations. The average grain size decreased from 30.4 μm to 21.9 μm, and the medium-angle grain-boundary fraction increased from 10.3% to 34.5%. Regionally, thickness reduction correlates strongly with PEEQ accumulation, SSD storage, and grain refinement, whereas geometrical deviation is more closely related to early-stage deformation heterogeneity. These findings provide a physically based route for predicting and controlling SPIF accuracy.