This paper investigates the microvibration induced by a pulse tube cryocooler mounting on a space camera, and it describes a full methodology and experimental verification to deal with microvibration predictions. A coupled transfer function matrix is introduced by improving the traditional disturbance model, which is apt to be more representative of the real boundary conditions. The coupled method corrects the microvibration input load by using force filters that depend on estimations of the interface accelerances. The impact of microvibration is predicted, based on transfer functions found from the modeled camera. A system-level microvibration test is performed to verify the predicted results. Dynamic coupling is shown to exist. After integrating the finite element analysis results with the optics design software, the performance of the optical system represented by the modulation transfer function is analyzed. The results show that the surface deformations caused by cooler microvibration are very small, which can be neglected compared with the rigid-body motion. This approach accurately predicts the microvibration and its influences, which provides a new way to analyze the microvibration of an optical load on spacecraft.
1 December 2019 in Review of Scientific Instruments
To image optical information in different spectral bands, remote sensors for Earth observation require an active filter-wheel drive mechanism for time-shared switching of the optical path. This paper presents the details of a modeling and testing methodology developed to predict the launch and in-orbit performance of such a filter wheel. The present filter-wheel drive mechanism was designed to achieve a highly precise and stable cut-in and cut-out optical path by means of a large-diameter angular-contact ball bearing driven by a stepper motor. A numerical model is used to analyze the structural dynamic characteristics of the system; mechanical experiments comprising modal, scanning, and microvibration tests are performed to evaluate the launch and in-orbit stability performance; and accelerated life testing of the solid-lubricated bearing is performed to predict its reliability under accelerated conditions. The results indicate that the filter-wheel system has guaranteed structural safety and the required long lifetime. This type of peripheral driven filter wheel with large thin-walled bearings provides a new method for use with large-aperture satellite cameras in space applications.
A reflective baffle for the optical system of a satellite camera based on the carbon fiber composite materials is designed and validated. Firstly, two typical reflective baffles including elliptical type and Stavroudis type are studied. High modulus carbon fiber composite materials are selected to achieve lightweight and high rigidity. The aluminum film is coated on the surface of vanes to enhance the surface spectral reflectivity. Then, temperature field under typical external heat flow is calculated and stray light suppression characteristics are analyzed. Finally, the finite element simulation and mechanical vibration experiment are performed to verify the reliability of the baffle structure. The results show that the reflective baffle meets the requirements of mechanical environment during the launch phase of satellite camera. It provides a reference for the design of the satellite camera baffles structure.
17 February 2025 in Journal of Vibration Engineering & Technologies
This paper presents a framework for the multilevel microvibration analysis and test of a space optical load platform. The test framework is conducted on three levels, including instrument, subsystem, and system level. Disturbance source experimental investigations are performed to evaluate the vibration amplitude and study vibration mechanism. Transfer characteristics of space camera are validated by a subsystem test, which allows the calculation of transfer functions from various disturbance sources to optical performance outputs. In order to identify the influence of the source on the spacecraft performance, a system level microvibration measurement test has been performed on the ground. From the time domain analysis and spectrum analysis of multilevel microvibration tests, we concluded that the disturbance source has a significant effect on its installation position. After transmitted through mechanical links, the residual vibration reduces to a background noise level. In addition, the angular microvibration of the platform jitter is mainly concentrated in the rotation of y-axes. This work is applied to a real practical application involving the high resolution satellite camera system.