This study investigates the stabilization performance of clayey soil treated with alkali-activated hybrid slag/cement. Sodium silicate (SS) and sodium hydroxide (SH) are used as alkali activators, whereas ground blast furnace slag (GGBS) and ordinary Portland cement (OPC) are used as sources of aluminosilicate. A total of 27 different types of mixtures are used for stabilization. Unconfined compressive strength (UCS) of untreated clay and stabilized soils are performed at immediately, 3-, 7-, 28-, and 90 days curing times under air-dried and wet-cured conditions. In addition, 90-d volume and mass changes in the samples are measured. Stabilized samples with an SS/SH ratio of 1 under air-dried conditions reveal moistening at early curing ages (≤28 days); afterward, sodium carbonate crystals appear in these samples at longer curing ages. Geopolymer-treated clayey soil exhibits lower volumetric and mass changes compared with OPC. Most of the stabilized clayey soil with alkali-activated hybrid slag/cement exhibits higher strength compared with OPC under air-dried and wet-cured conditions.
18 May 2023 in Academic Platform Journal of Engineering and Smart Systems
In this study, unconfined compressive strength values of sand soil injected with microfine cement were predicted using fuzzy logic method. Mamdani and Sugeno methods were applied in the fuzzy logic models. In addition, a regression analysis was carried out in order to compare these two methods. In the models, water/cement ratio and injection pressure were the input variables, and unconfined compressive strength was the output variable. The dataset includes 427 samples, which were experimentally injected with microfine cement. Predictions for unconfined compressive strength were obtained by creating membership functions and rule base for each input (predictive) parameter in fuzzy logic models. The coefficient of determination (R2) and Mean Square Error (MSE) were used as criteria for evaluating the performance of the developed models. The results suggested that the three applied models (i.e. Mamdani, Sugeno and regression) provided statistically significant results, and these methods could be used in the future prediction-based studies. The results showed that Sugeno model provided the best performance for predicting unconfined compressive strength. It was followed by Mamdani and Regression models, respectively. This study has suggested that the fuzzy logic method can be an alternative to the regression method which traditionally has been used in prediction process.
24 September 2021 in Arabian Journal of Geosciences
Tr en Bu çalışmanın amacı, radyoaktif jeofizik kuyu logu araştırmalarından elde edilen Uranyum, Toryum, Potasyum ve Gamma-Ray verileri ile laboratuvar çalışmaları neticesinde hesaplanan Uranyum rezerv miktarları arasındaki ilişkilerin incelenmesidir. Çalışmada kullanılan veriler Nevşehir ili sınırları içerisinde toplanmış olup, toplam 34 sondaj çalışmasından karot alınarak elde edilmiştir. Bu karot numuneler laboratuvar ortamında incelenerek rezerv miktarının belirlenmesine yönelik fiziksel parametreler elde edilmiştir. Kuyu logu ve laboratuvar verilerine toplamda 38 olmak üzere basit ve çoklu regresyon analizlerii yapılmıştır. Regresyon analizleri sonucundaile her bir model için belirleme katsayısı (R2), standart hata miktarları gibi istatistiksel değerler hesaplanmış ve Uranyum değerinin ve rezerv miktarının kestirimine yönelik olarak ampirik bağıntılar önerilmiştir. The aim of this study is to investigate the relationship between the uranium reserve amounts of the laboratory results and Uranium, Thorium, Potassium and Gamma-Ray datas from the geophysical well logs. The data used in the study were collected in the Nevşehir province and obtained by taking cores from 34 drilling works. From the examination of these core samples, the physical parameters for determining the amount of the reserve were obtained. In total, 38 simple and multiple regression analyses were performed with the data of well logs and laboratory. With the regression analyses, the statistical values such as coefficient of determination (R2), standard error were calculated for each model and the empirical equations were suggested for the estimation of the uranium value and the amount of the reserve.