Judith Betetta

Dr. Judith Betetta

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2013
Verified
Conference Paper
Closed access
CMCarlos Medina-Ramos
Carlos Medina-Ramos
JBJudith Betetta
Judith Betetta
DCDaniel Carbonel-Olazabal
Daniel Carbonel-Olazabal
MPMiguel Pilco-Barrenechea
Miguel Pilco-Barrenechea
A Model Predictive Control (MPC) scheme in order to reduce the great electrical demand and mechanical stresses on laminator systems, which are presented at the transient states when the machine is started up under load, is reported. This study is presented in two parts: first, the system is identified through Volterra-Laguerre (V-L) model. Here, the system parameters are extracted using a set of input-output data obtained by applying a Pseudo Random Multi Sequence (PRMS) on system under study. The methodology for system identification is based in the projection of the Volterra kernels onto a Hilbert space, built by Laguerre polynomials, as a set of Orthogonal Basis Functions (OBF). Second, when the V-L model is known it enters inside a MPC for a precise control of the rolling mill speed, which is a crucial indicator in order to guarantee an optimal manufacture of vinyl tile. The MPC used in this study is inspired from the Dynamic Matrix Control (DMC) algorithm, which improves the precision on the tracking trajectory control. Simulations have shown that a MPC based on the V-L model, could give a quadratic error about 0.015%, after transient state, indicating its robustness.

1 October 2011
Verified
Conference Paper
Closed access
CMCarlos Medina-Ramos
Carlos Medina-Ramos
JBJudith Betetta
Judith Betetta
DCDaniel Carbonel-Olazabal
Daniel Carbonel-Olazabal
MPMiguel Pilco-Barrenechea
Miguel Pilco-Barrenechea
The control systems used in batch reactors for heating processes can be optimized by using advanced control techniques to allow tracking set-points when they are changing in time. In this sense, we propose to use one scheme Model Predictive Control (MPC) based on Auto Regressive with Exogenous Input (ARX) model projecting the parameters of the classical ARX model onto a set Orthogonal Basis Functions (OBF), thus obtaining a better performance of the new model. This approach enabled to identify the reactor system with a drastically reduction of involved parameters. In addition, the most important achievement was obtained to the represent the nonlinearities and variations of chemical components inside batch reactor. Finally, the theoretical analysis and simulations of the hybrid model have proved that the MPC based on ARX-Hybrid model ensures the trajectory tracking of temperature inside reactor with excellent accuracy and moreover reduces the batch cycle time.

1 October 2014
Verified
Conference Paper
Closed access
CMCarlos Medina-Ramos
Carlos Medina-Ramos
JBJudith Betetta
Judith Betetta
DCDaniel Carbonel-Olazabal
Daniel Carbonel-Olazabal
MPMiguel Pilco-Barrenechea
Miguel Pilco-Barrenechea
The phenolic resin formation process it can improve if phenol-formaldehyde reaction can be expressed by novel models in which its exothermicity, as well as its chemistry kinetics, is involve. For obtain such objective, the identification process is performed by using the formalisms, Volterra-Hybrid (VL) and Laguerre (LM), as proposed. Nevertheless, is noteworthy that this work is focused in identification the behavior of this reaction in resol-type resin synthesis, under conditions of molar excess and alkaline conditions in industrial batch reactors. In this study, all behavior patterns of the process are mathematically described. The process is started up by heating the reactants, up to reach 62°C in which is reached the activation energy, whereby is must stop the heating action due to manifesting exothermicity of the reaction. Then with this temperature within the reactor, the second stage starts up by applying water in the cooling jacket for smoothing the exothermicity degree, and minimize the risk at the system, in this stage the reactants should reach 102°C. Then the third phase is started up, such that the steam that not yet is part of the resin, it refluxes between a heat exchanger and the reactor. The goal of this activity is reach to compensate the exothermicity. Nevertheless this reflux action has an average duration of 45 min, and when reactor is cooled 101°C only the phenolic resin should be keep inside reactor, thereby the remainder of water must be excluded. Finally, around 100°C start the fourth phase, it which finishes when the reactor is cooling at the temperature of 50°C, and then all process is closed by adding around 1.5% of ethanol. The methodology applied has shown an acceptable fitting between model and data, which it means the model, presents important prospects as a tool to automate the exothermic batch reactors with strong challenges by using mathematical models, without the complexity of the chemical equations.

22 December 2016
Verified
Conference Paper
Closed access
CMCarlos Medina-Ramos
Carlos Medina-Ramos
JBJudith Betetta
Judith Betetta
DCDaniel Carbonel
Daniel Carbonel
MMMilagros Manrique
Milagros Manrique
This paper presents the design of a Dynamic Matrix of Control “DMC” to control exothermic processes, multi-stages type, in batch reactors in order to enhance the production quality. To reach these aims, a set of mathematics models based on the Volterra Series and Laguerre functions are introduced. The obtained results suggest that these systems identified based on mathematical criteria together with a DMC controller can be applied to control exothermic reactions efficiently. The application of the controller in an industrial reactor focused in phenolic resin production was able to overcome the difficulty and risks that involve handling this highly exothermic reaction. Results obtained by using these suggestions indicate that the DMC together with the models identified would be a reliable control system to manufacture high-quality products and moreover with high consistency among batches produced as required nowadays in the global market.

1 November 2012
Verified
Conference Paper
Closed access
CMCarlos Medina-Ramos
Carlos Medina-Ramos
DCDaniel Carbonel-Olazabal
Daniel Carbonel-Olazabal
JBJudith Betetta
Judith Betetta
MPMiguel Pilco-Barrenechea
Miguel Pilco-Barrenechea
This paper is focused in to identify a laminator for manufacturing vinyl tile, powered by a direct current motor with a load torque applied on rolling mill, before starting the operation. The approach is based in the use of first order Model of Volterra-Laguerre (VLM) and based in this criterion the laminator system is then identified by using input-output data obtained from the system. For this purpose a set of Orthogonal Functions contained in a finite Basis (OBF), were used to represent the Volterra kernels, such that the nonlinearities and changes in the "time varying system" were tracked faithfully. Finally, the number of Volterra kernels is strongly reduced, thereby yielding a model much more tractable.

6 December 2023 in TECNIA
Verified
Journal Article
Open access
PDF file
JLJosé Enrique Farfán Lira
José Enrique Farfán Lira
JBJudith Betetta
Judith Betetta
JSJohann Navarro Solano
Johann Navarro Solano
BSBryam Raúl Armas Sedano
Bryam Raúl Armas Sedano
El presente trabajo se basa en el desarrollo de un dispositivo capaz de medir diversos parámetros relacionados con la tarificación y calidad de energía, de un suministro eléctrico de 220V trifásico y 60Hz, estos son: los valores eficaces y armónicos de las tensiones y corrientes del sistema trifásico, junto con sus respetivos desfasajes, la frecuencia del sistema y las potencias y energías trifásicas (tanto activa, reactiva y aparente). El presente dispositivo se basa en un microcontrolador ESP32 programado en lenguaje C++ el cual estará conectado inalámbricamente a la plataforma web mediante Wi-Fi para su lectura remota. El indicador externo para la medición de la energía activa es mediante las pulsaciones de un led a razón de 950 impulsos/kw-h. En el caso de la medición de armónicos el algoritmo aplica la transformada rápida de Fourier, o FFT por sus siglas en inglés, sobre un periodo de onda representativo obtenido por métodos de undersampling, o muestreo de baja velocidad, para elevar el rango de armónicos legibles. La validación de la medición de energía se realiza mediante la prueba de contraste detallada en la IEC 62053- 21, resultando el dispositivo diseñado de clase 1 y la validación de la lectura de los demás parámetros se realiza mediante comparación con un analizador de redes utilizando los criterios de aceptación de la norma IEC 61557-12 siendo también de clase 1, ambas pruebas realizadas en el laboratorio N°6 de electricidad de la UNI.